Updated Jan-2022 Exam JN0-635 Dumps - Pass Your Certification Exam
Latest Real Juniper JN0-635 Exam Dumps Questions
NEW QUESTION 29
You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.
Which configuration accomplishes these objectives?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Explanation/Reference: https://www.oreilly.com/library/view/juniper-srx-series/9781449339029/ch06.html
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Data is transmitted across the link in plaintext
- B. Data is transmitted across the link in cyphertext
- C. The link is not protected against man-in-the-middle attacks
- D. The link is protected against man-in-the-middle attacks
Answer: B,C
NEW QUESTION 31
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. persistent NAT
- B. NAT46
- C. DS-Lite
- D. NAT64
Answer: D
NEW QUESTION 32
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN.
Which two actions should you take to accomplish this task? (Choose two.)
- A. Enable IKEv2 within the VPN configuration on the SRX Series device
- B. Configure the necessary traffic selectors within the VPN configuration on the SRX Series device
- C. Configure split tunneling on the NCP profile on the remote client
- D. Enable the split tunneling feature within the VPN configuration on the SRX Series device
Answer: B,C
Explanation:
Reference:
vpns-with-ncp-exclusive-remote-access-client.html
NEW QUESTION 33
Click the Exhibit button.
Referring to the exhibit, which three types of traffic would be examined by the IPS policy between Switch-1 and Switch-2? (Choose three.)
- A. UDP
- B. ICMP
- C. ARP
- D. TCP
- E. LLDP
Answer: A,B,D
NEW QUESTION 34
You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 35
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of three interfaces.
- B. The collector must have a minimum of four interfaces.
- C. The collector must have a minimum of five interfaces.
- D. The collector must have a minimum of two interfaces.
Answer: B
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/task/configuration/jatp-traffic-collectorsetting-ssh-honeypot-detection.html
NEW QUESTION 36
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. External hosts cannot initiate contact.
- B. The configured solution allows IPv6 to IPv4 translation.
- C. The IPv6 address is invalid.
- D. The configured solution allows IPv4 to IPv6 translation.
Answer: B,C
NEW QUESTION 37
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN.
Which two actions should you take to accomplish this task? (Choose two.)
- A. Enable IKEv2 within the VPN configuration on the SRX Series device
- B. Configure the necessary traffic selectors within the VPN configuration on the SRX Series device
- C. Configure split tunneling on the NCP profile on the remote client
- D. Enable the split tunneling feature within the VPN configuration on the SRX Series device
Answer: B,C
NEW QUESTION 38
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit. What is the cause of the error?
- A. The SRX Series device certificate does not match the JATP certificate
- B. The fxp0 IP address is not routable
- C. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- D. A firewall is blocking HTTPS on fxp0
Answer: C
NEW QUESTION 39
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. IPsec is securing data across the control interface
- B. MACsec is securing data across the control interface
- C. SSH is securing data across the control interface
- D. ARP security is securing data across the control interface
Answer: B
NEW QUESTION 40
Click the Exhibit button.
You deployed a site-to-site IPsec VPN connecting two data centers together using SRX5800s. After examining the performance of the IPsec VPN, you decide to enable IPsec performance acceleration to increase the rate of traffic that can be sent through the tunnel.
Referring to the exhibit, which two statements should you add to the configuration to accomplish this task?
(Choose two.)
[edit security flow]
- A. user@srx# set load-distribution session-affinity ipsec
- B. user@srx# set power-mode-ipsec
[edit security flow] - C. user@srx# set ipsec-performance-acceleration
[edit security flow] - D. user@srx# set tcp-mss ipsec-vpn mss 65535
[edit security flow]
Answer: A,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-improving-ipsec- vpn-traffic-performance.html
NEW QUESTION 41
Click the Exhibit button.
Referring to the exhibit, what is the maximum number of zones that are able to be created within all logical systems?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 42
Click the Exhibit button.
Referring to the exhibit, which IPS deployment mode is running on the SRX5800 device?
- A. monitor mode
- B. sniffer mode
- C. integrated mode
- D. in-line tap mode
Answer: C
NEW QUESTION 43
Exhibit.
A hub member of an ADVPN is not functioning correctly.
Referring the exhibit, which action should you take to solve the problem?
- A. [edit security]
user@hub-1# delete ike gateway advpn-gateway advpn partner - B. [edit interfaces]
user@hub-1# delete ipsec vpn advpn-vpn traffic-selector - C. [edit security]
user@hub-1# set ike gateway advpn-gateway advpn suggester disable - D. [edit interfaces]
root@vSRX-1# delete st0.0 multipoint
Answer: B
NEW QUESTION 44
Click the Exhibit button.
Which statement is correct regarding the information show in the exhibit?
- A. The output is for an ADVPN
- B. The tunnel is not encrypting the traffic
- C. The tunnel binding was discovered automatically
- D. The tunnel gateway address was automatically discovered
Answer: D
NEW QUESTION 45
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. SRX Series devices will not block traffic based on this third-party feed
- B. SRX Series devices will block traffic based on this third-party feed
- C. Events based on this third-party feed will affect a host's threat score
- D. Events based on this third-party feed will not affect a host's threat score
Answer: B,D
NEW QUESTION 46
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Juniper Networks will not investigate false positives generated by this custom feed.
- B. The custom infected hosts feed will not overwrite the Sky ATP infected host's feed.
- C. Juniper Networks will investigate false positives generated by this custom feed.
- D. The custom infected hosts feed will overwrite the Sky ATP infected host's feed.
Answer: A,D
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/junos-space18.1/policy-enforcer/topics/task/configuration/junos-space-policyenforcer-custom-feeds-infected-host-configure.html
NEW QUESTION 47
Exhibit.
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A. [edit security ike gateway advpn-gateway]
user@srx# set advpn suggester disable - B. [edit security ike gateway advpn-gateway]
user@srx# delete advpn partner - C. [edit interfaces]
user@srx# delete st0.0 multipoint - D. [edit security ike gateway advpn-gateway]
user@srx# set version v1-only
Answer: A,B
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery-vpns.html
NEW QUESTION 48
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit. What is the cause of the error?
- A. The SRX Series device certificate does not match the JATP certificate
- B. The fxp0 IP address is not routable
- C. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- D. A firewall is blocking HTTPS on fxp0
Answer: C
NEW QUESTION 49
Click the Exhibit button.
Given the command output shown in the exhibit, which two statements are true? (Choose two.)
- A. The host 10.10.101.10 is directly connected to interface ge-0/0/4.0
- B. Network Address Translation is applied to this session
- C. Traffic matching this session has been received since the session was established
- D. The host 172.31.15.1 is directly connected to interface ge-0/0/3.0
Answer: A,C
NEW QUESTION 50
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. You can secure inter-VLAN traffic with a security policy on this device
- B. You can secure intra-VLAN traffic with a security policy on this device
- C. The device cannot pass Layer 2 and Layer 3 traffic at the same time
- D. The device can pass Layer 2 and Layer 3 traffic at the same time
Answer: B,C
NEW QUESTION 51
......
JN0-635 Dumps To Pass Junos Security Exam in One Day : https://www.itexamreview.com/JN0-635-exam-dumps.html
100% Guaranteed Results JN0-635 Unlimited 90 Questions: https://drive.google.com/open?id=1KA4J-wuXCqqe5UTnWBwr1_wLD3EauSio
