Real Microsoft AZ-120 Exam Questions Study Guide
Updated and Accurate AZ-120 Questions for passing the exam Quickly
NEW QUESTION # 165
A customer has an on-premises SAP environment.
The customer plans to migrate SAP to Azure.
You need to prepare the environment for the planned migration.
Which three actions should you perform in sequence before the migration? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 166
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/deployment-guide
NEW QUESTION # 167
You have an SAP environment on Azure.
You use Azure Site Recovery to protect an SAP production landscape.
You need to validate whether you can recover the landscape in the event of a failure. The solution must minimize the impact on the landscape.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Step 1: Create a virtual network...
We recommended that for test failover, you choose a network that's isolated from the production recovery site network specific in the Compute and Network settings for each VM. By default, when you create an Azure virtual network, it is isolated from other networks. The test network should mimic your production network:
The test network should have same number of subnets as your production network. Subnets should have the same names.
The test network should use the same IP address range.
Step 2: Add a public IP address...
Because Site Recovery does not replicate the cloud witness, we recommend that you deploy the cloud witness in the disaster recovery region.
Step 3: Shut down production virtual machines
Make sure that the primary VM is shut down when you run the test failover. Otherwise there will be two VMs with the same identity, running in the same network at the same time. This can lead to unexpected consequences.
Step 4: Select Test failover from the Recovery Plans blade
References:
https://docs.microsoft.com/en-us/azure/site-recovery/site-recovery-test-failover-to-azure
NEW QUESTION # 168
You have a Recovery Services vault backup policy for SAP HANA on an Azure virtual machine as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer selected as in image below.
Answer:
Explanation:
NEW QUESTION # 169
You plan to migrate an SAP environment to Azure.
You need to design an Azure network infrastructure to meet the following requirements:
* Prevent end users from accessing the database servers.
* Isolate the application servers from the database servers.
* Ensure that end users can access the SAP systems over the internet
Minimize the costs associated to the communications between the application servers and database servers Which two actions should you include in the solution? Each correct answer presents pan of the solution. NOTE: Each correct selection is worth one point.
- A. Configure an infernal Azure Standard Load Balancer for incoming connections.
- B. Configure Azure Traffic Manager to route incoming connections.
- C. Create a site-to-site VPN between the on premises network and Azure.
- D. In the same Azure virtual network, segregate the SAP application service and database servers by using different subnets and network security groups.
- E. Segregate the SAP application servers and database servers by using different Azure virtual networks.
Answer: B
NEW QUESTION # 170
For each of the following statements, select yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 171
You need to provide the Azure administrator with the values to complete the Azure Resource Manager template.
Which values should you provide for diskCount, StorageAccountType, and domainName? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: 4
Scenario: the Azure Resource Manager template that will be used to provision the production application servers.
Ensure that each production application server has four 1-TB data disks.
Box 2: Standard_LRS
Scenario: Minimize costs whenever possible.
Box 3: contoso.onmicrosoft.com
The network contains an on-premises Active Directory domain named ad.contoso.com.
The Initial domain: The default domain (onmicrosoft.com) in the Azure AD Tenant. For example, contoso.onmicrosoft.com.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/plan-connect-userprincipalname
NEW QUESTION # 172
You have an on-premises SAP landscape and an Azure subscription that contains a virtual network named VNET1. VNET1 has the following settings.
You plan to migrate the landscape to Azure.
You need to configure VNET1 to support the SAP landscape.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the settings.
NOTE:Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, table Description automatically generated
Box 1: add a virtual network gateway
Box 2: use remote gateways
Each virtual network, regardless of whether peered with another virtual network, can still have its own gateway to connect to an on-premises network. When you peer virtual networks, you can also configure the gateway in the peered virtual network as a transit point to an on-premises network. In this case, the virtual network that uses a remote gateway cannot have its own gateway. A virtual network can have only one gateway that can be either a local or remote gateway (in the peered virtual network).
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-peering-overview
NEW QUESTION # 173
You deploy SAP HANA by using SAP HANA on Azure (Large Instances).
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: Yes
Box 2: Yes
The SAP Azure Enhanced Monitoring Extension allows for collecting diagnostic data including OS and Application performance counters from Azure VMs running SAP workloads.
Box 3: No
References:
http://www.deployazure.com/compute/virtual-machines/sap-azure-enhanced-monitoring-extension/
https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/azure-monitor-overview
NEW QUESTION # 174
You have an on-premises SAP landscape and a hybrid Microsoft Entra tenant. You plan to enable Microsoft Entra authentication for SAP NetWeaver. What should you configure first in Microsoft Entra ID?
- A. a service principal
- B. a Microsoft Entra Application Proxy
- C. a conditional access policy
- D. a user flow
Answer: B
NEW QUESTION # 175
You have an SAP production landscape that uses SAP HANA databases.
You configure a metric alert for the primary HANA server as shown in the following exhibit.
Answer:
Explanation:
NEW QUESTION # 176
You plan to deploy an SAP landscape on Azure that will use SAP HANA on Azure (Large Instances).
You need to ensure that outbound traffic from the application tier can flow only to the database tier. What should you use?
- A. network security groups (NSGs)
- B. application security groups
- C. network virtual appliances (NVAs)
- D. Azure Firewall
Answer: B
NEW QUESTION # 177
You plan to deploy multiple SAP HANA virtual machines to Azure by using an Azure Resource Manager template.
How should you configure Accelerated Networking and Write Accelerator in the template? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: true
enableAcceleratedNetworking: If the network interface is accelerated networking enabled.
To further reduce network latency between Azure VMs, we [Micorosoft] recommend that you choose Azure Accelerated Networking. Use it when you deploy Azure VMs for an SAP workload, especially for the SAP application layer and the SAP DBMS layer.
Box 2: true
Write Accelerator should be used for the volumes that contain the transaction log or redo logs of a DBMS. It is not recommended to use Write Accelerator for the data volumes of a DBMS as the feature has been optimized to be used against log disks.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/dbms_guide_general
NEW QUESTION # 178
You plan to deploy a highly available ASCS instance to SUSE Linux Enterprise Server (SLES) virtual machines in Azure.
You are configuring an internal Azure Standard Load Balancer for the ASCS instance.
How should you configure the internal Standard Load Balancer? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Session persistence: None.
Floating IP: Enabled.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/high-availability-guide-suse
NEW QUESTION # 179
You have an SAP on Azure deployment that contains a production landscape and a non-production landscape.
You have the virtual machines shown in the following table.
You need to minimize the costs of the deployment for the next 12 months. The solution must meet the following requirements:
* Maintain SAP support
* Minimize application impact.
What should you do on each virtual machine? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Topic 1, Litware, inc Case Study
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all question include on this exam in the time provided.
To answer the question included in a case study, you will need to reference information that is provided in the case study. Case studies might contain and other resources that provide information about the scenario that is describe in the case study. Each question is independent of the other question in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answer and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To Start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such the content requirements, existing environment, and problem statements, if the case study has an All Information tab, note that the information displayed its identical to the information displayed on the subsequence tabs. When you are ready to answer a question click the Question button to return to the question.
Overview
Litware, inc. is an international manufacturing company that has 3,000 employees.
Litware has two main offices. The offices are located in Miami, FL, and Madrid Spain.
Existing Environment
Infrastructure
Litware currently uses a third-party provider to host a datacenter in Miami and a disaster recovery datacenter in Chicago, it.
The network contains an Active Directory domain named litware.com.Litware has two third-party applications hosted in Azure.
Litware already implemented a site-to-site VPN connection between the on-premises network and Azure.
SAP Environment
Litware currently runs the following SAP products:
* Enhancement Pack 6 for SAP ERP Central Component 6.0 (SAP ECC 6.0)
* SAP Extended Warehouse Management (SAP EWM)
* SAP Business Warehouse (SAP BW)
* SAP NetWeaver Process Integration (PI)
* SAP Solution Manager
All users run on the Windows Server platform. All databases use Microsoft SQL Server. Currently, you have
20 production servers.
You have 30 non-production servers including five testing severs, five development servers, five quality assurance (QA) servers, and 15 pre=production servers.
Currently, all SAP applications are in the litware.com domain.
Problem Statements
The current version of SAP ECC has a transaction that, when run in batches overnight, tables eight hours to complete. You confirm that upgrading to SAP Business Suite on HANA will improve performance because of code changes and the SAP HANA database platform.
Litware is dissatisfied with the performance of its current hosted infrastructure vendor. Litware experienced several hardware failures and the vendor struggled to adequately its 24/7 business operation.
Business Goals
Litware identifies the following business goals:
* Increase the performance of SAP ECC application by moving to SAP HANA. All other database will remain on SQL Server.
* Move away from the current infrastructure vendor to increase the stability and availability of the SAP services.
* Use the new Environment, Health and Safety (EH&S) in Recipe Management function.
* Ensure that any migration activities can be completed within a 48-hour period during a weekend.
Planned Changes
Litware identifies the following planned changes:
* Migrate SAP to Azure.
* Upgrade and migrate SAP ECC to SAP business Suite on HANA Enhancement Pack 8.
Technical requirements
Litware identifies the following technical requirements:
* Implement automated backups.
* Support load testing during the migrate.
* Identify opportunities to reduces costs during the migration.
* Continue to use the Litware.com domain for all SAP landscapes.
* Ensure that all SAP applications and databases are highly available.
* Remove all SAP components from the on-premises network once the migrate is complete.
* Minimize the purchase of additional SAP licenses. SAP HANA license were already purchased.
* Ensure that SAP can provide technical support for all the SAP landscapes deployed to Azure.
NEW QUESTION # 180
You have an SAP on Azure deployment that contains a production landscape, a development landscape, and a quality assurance landscape. All the landscapes are hosted on Azure virtual machines.
You need to create a monthly report that identifies opportunities for performance and security optimization. The solution must minimize administrative effort What should you use?
- A. SAP GUI
- B. Azure Advisor
- C. SAP HANA hardware and cloud measurement tools
- D. Azure Monitor
Answer: B
NEW QUESTION # 181
You deploy an Azure Internal load balancer.
You deploy a node of an SAP NetWeaver 7.4 ABAP system named SP1.
You plan to deploy a second node.
You need to verify that the health probe port is configured for the cluster. The cluster IP address resource name is SAP SP1 IP.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/sap/sap-high-availability-installation-wsfc-shared-disk
NEW QUESTION # 182
You have two Azure virtual machines named VM1 and VM2. VM1 hosts a single database container (SDC) for SAP HANA instance named sdl. VM2 hosts an SDC HANA instance named sd2. Azure Backup is enabled for the HANA databases on VM1 and VM2.
You need to restore sd1 to sd2 and overwrite the database instance on VM2.
What should you do first in the Azure portal?
- A. From Restore Configuration, set Restored DB Name to sd1 (sdc).
- B. Upgrade sd2 to Multiple Database Container (MDQ.
- C. From Restore Configuration, set Restored DB Name to sd2(sdc).
- D. Rename the SystemDB database of sd2.
Answer: A
NEW QUESTION # 183
You are deploying an SAP environment on Azure that will use an SAP HANA database server.
You provision an Azure virtual machine for SAP HANA by using the M64s virtual machine SKU.
You need to set the swap space by using the Microsoft Azure Linux Agent (waagent) configuration file.
Which two settings should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. ResourceDisk.EnableSwapEncryption=n
- B. ResourceDisk.EnableSwap=y
- C. AutoUpdate.Enabled=n
ResourceDisk.SwapSizeMB=229376
Answer: B
Explanation:
To create a swap file in the directory that's defined by the ResourceDisk.MountPoint parameter, you can update the /etc/waagent.conf file by setting the following three parameters:
ResourceDisk.Format=y
ResourceDisk.EnableSwap=y
ResourceDisk.SwapSizeMB=xx
Reference:
https://support.microsoft.com/en-us/help/4010058/how-to-add-a-swap-file-in-linux-azure-virtual-machines
NEW QUESTION # 184
You have an SAP production landscape in Azure that is hosted on virtual machines that run Windows Server and Red Hat Enterprise Linux.
You need to monitor the virtual machines. The solution must ensure that you can collect logs from the virtual machines by using data collection rules (DCRs).
What should you install on each virtual machine?
- A. the Log Analytics agent
- B. the Azure Diagnostics extension
- C. the Guest Configuration extension
- D. the Azure Monitor agent
Answer: D
NEW QUESTION # 185
You deploy an SAP environment on Azure.
You need to configure SAP NetWeaver to authenticate by using Azure Active Directory (Azure AD).
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 186
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a complex SAP environment that has both ABAP- and Java-based systems. The current on-premises landscapes are based on SAP NetWeaver 7.0 (Unicode and Non-Unicode) running on Windows Server and Microsoft SQL Server.
You need to migrate the SAP environment to a HANA-certified Azure environment.
Solution: You deploy a new environment to Azure that uses SAP NetWeaver 7.4. You export the databases from the on-premises environment, and then you import the databases into the Azure environment.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Explanation
Instead use Azure Site Recovery to migrate.
Reference:
https://docs.microsoft.com/en-us/azure/site-recovery/vmware-azure-architecture
NEW QUESTION # 187
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
YES
YES
NO
NEW QUESTION # 188
You deploy an SAP environment on Azure.
You need to grant an SAP administrator read-only access to the Azure subscription. The SAP administrator must be prevented from viewing network information.
How should you configure the role-based access control (RBAC) role definition? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 189
You have an on- premises SAP environment hosted on VMware VSphere that in Microsoft SQL Server as the database platform. You plan to migrate the environment to Azure. The database platform will remain the same. You need gather information to size the target Azure Environment for the migration. What should you use?
What should you use?
- A. the SAP NANA sizing report
- B. Azure Advisor
- C. Azure Monitor
- D. the SAP EarlyWatch Alert report
Answer: D
Explanation:
https://azure.microsoft.com/nl-nl/blog/sap-on-azure-architecture-designing-for-performance-and-scalability/
"For existing on-premises systems, you should reference system configuration and resource utilization data. The system utilization information is collected by the SAP OS Collector and can be reported via SAP transaction OS07N as well as the EarlyWatch Alert. "
NEW QUESTION # 190
......
Prepare Important Exam with AZ-120 Exam Dumps: https://www.itexamreview.com/AZ-120-exam-dumps.html
Download Real AZ-120 Exam Dumps for candidates. 100% Free Dump Files: https://drive.google.com/open?id=1ZwdjlUyO8cC4pb9WKL-OfhVionBMeYCF
