Network Appliance NS0-592 Dumps - The Sure Way To Pass Exam
NS0-592 Exam Questions (Updated 2022) 100% Real Question Answers
NEW QUESTION 10
After you replaced the motherboard, the node stopped in the "waiting for the cluster application to come online" state.
Which two actions should you perform to troubleshoot this problem? (Choose two.)
- A. Verify the setting of the cluster interconnect switch.
- B. Verify that the physical links on the cluster ports are up.
- C. Check the status of the cluster with the cluster ring show command.
- D. Check the status of the HA with the interconnect-up field of storage failover show command.
Answer: C,D
NEW QUESTION 11
In a 4-node cluster, nodes 1 and 2 are an HA pair, and nodes 3 and 4 are an HA pair. The following error appears in the log.
12/15/2018 15:48:47 node-2CRITICALclam.node.ooq: Node (name=node- 2, ID= 1001) is out of "CLAM quorum" (reason =quorum update).
In this scenario, which two statements are correct? (Choose two.)
- A. Node 2 takes over node 1.
- B. All LUNs are offline in the cluster.
- C. All LUNs are online in the cluster.
- D. Node 1 takes over node 2.
Answer: B,D
NEW QUESTION 12
Your customer added a new DS2246 shelf to an existing stack on their FAS8060A system. The customer then noticed that the new shelf's disks appear with the shelf serial number instead of the shelf ID in the sysconfig -r command output.
What is the reason for this problem?
- A. The ACP is cabled incorrectly.
- B. There is failed IOM module in the new shelf.
- C. The new shelf has the same ID as another shelf.
- D. The SAS is cabled incorrectly.
Answer: D
NEW QUESTION 13
Click the exhibit button.
A customer reports that storage latency has recently increased substantially. No changes have been introduced, and the traffic did not change.
Referring to the output shown in the exhibit, which corrective step should be taken?
- A. Move some volumes off the affected aggregate.
- B. Add more spindles.
- C. Perform the volume reallocation.
- D. Throttle the client traffic.
Answer: D
NEW QUESTION 14
Click the exhibit button.
When you log in to a node, a warning is displayed as shown in the exhibit.
Which statement is correct in this scenario?
- A. The partner still hosts the CFO aggregate for the node.
- B. The node cannot communicate with the rest of the nodes in the cluster.
- C. The node root volume was moved to a new aggregate.
- D. One or more RDB db files are damaged due to an internal software error.
Answer: B
NEW QUESTION 15
You are running a fabric-attached MetroCluster configuration with ONTAP 9.5software. There is a maintenance window for the upcoming weekend. Plexes in your mirrored aggregates between your two data centers have not been synchronizing for two days.
When the resynchronizations begin, they are not as quick as expected, and the process takes more than a day.
You have been modifying the number of concurrent I/O streams using the storage raid-options modify raid.
resync.num_concurrent_ios_per_rg command, but the resynchronization speed stays slow.
You have four separate ISLs between your data centers using Brocade 6510 switches. Hardware problems are not an issue.
Which two actions should you take to prevent this problem in the future?
(Choose two.)
- A. Update to at least ONTAP 9.4 software.
- B. Avoid changes on your aggregates during the maintenance window.
- C. Take the corresponding plexes offline before maintenance to avoid a base-level synchronization.
- D. Restart the resynchronizations after modifying storage raid-options modify raid.resync.num_concurrent_ios_per_rg command.
Answer: A,D
NEW QUESTION 16
A customer reports that a LUN is offline because the volume is out of space even though the space-reserve parameter is configured to enabled on the LUN.
Which two statements are correct in this scenario? (Choose two.)
- A. Deduplication is inflating the LUN when it is brought online.
- B. The containing aggregate is thin-provisioned.
- C. The volume has snapshots.
- D. The fractional reserve is set to 0%.
Answer: B,C
NEW QUESTION 17
The error message shown below is reported in the EMS log file.
"[sis.changelog.full:warning]: Change logging metafile on volume DATA1 is full and can not hold any more fingerprint entries." What are two ways to solve this problem? (Choose two.)
- A. Clear the changelog manually so that the operation can restart.
- B. Modify the storage efficiency policy so that deduplication runs more frequently.
- C. Increase the size of the changelog to allow the operation to continue.
- D. Modify the threshold that triggers a deduplication operation.
Answer: C,D
NEW QUESTION 18
You have a 2-node ONTAP Select HA deployment. In this scenario, which application manages the quorum, if one node fails?
- A. vCenter Server
- B. ONTAP Deploy VM
- C. ONTAP Mediator
- D. Tiebreaker
Answer: B
NEW QUESTION 19
Click the exhibit button.
Referring to the exhibit, which change is required to enable the CIFS Autolocation function for the Users share?
- A. Change the CIFS share's Symlink Properties parameter to symlinks.
- B. Modify the CIFS server's option to enable SMB multichannel.
- C. Edit the CIFS share's properties to remove the changenotify property.
- D. Re-create the LIFs to allow both CIFS and NFS protocols.
Answer: A
NEW QUESTION 20
A customer performs a takeover and giveback of their controllers and notices that several of their NFS clients lose access to their volumes for a short period of time during the SFO process. The customer reviewed the LIF failover policies, and the polices are correct.
What is the reason for this behavior?
- A. NFSv4 file locks need to be broken manually before initiating an SFO operation.
- B. The export policies are incorrect and must be updated with node's HA partner LIF information.
- C. The clients are using NFSv4 to access the volumes.
- D. A firewall is blocking the necessary network ports and needs to be updated to allow NFS communication.
Answer: C
NEW QUESTION 21
The root aggregate on your single-node ONTAP cluster failed. You have the configuration backups saved on your FTP server?
In this scenario, which two steps are part of the recovery procedure? (Choose two.)
- A. Perform a Netboot using the configuration backup.
- B. Create a new aggregate and set its ha_policy option to sfo.
- C. Create a new root aggregate and set its ha_policy option to cfo.
- D. Boot into maintenance mode.
Answer: C,D
NEW QUESTION 22
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)
- A. stats volume
- B. lun stats -vserver
- C. statit
- D. stats lun
Answer: B,C
NEW QUESTION 23
You are investigating a CIFS issue at a customer site, but it is unclear which SMB version is being used between the client and the server. The customer has provided you with a packet trace output.
In this scenario, which packet exchange contains information to indicate which SMB version was agreed upon by the client and the server?
- A. Tree Connect Request TreeTree Connect Request Response
- B. Negotiate Protocol RequestNegotiate Protocol Response
- C. Session Setup Request Session Setup Response
- D. Ioct1 Request FSCTL_DFS_GET_REFERRALSIoct1 Response FSCTL_DFS_GET_REFERRALS
Answer: A
NEW QUESTION 24
Click the exhibit button.
Your customer has severe latency on one of their SATA aggregates. You run the statit -b and statit -e commands to obtain detailed disk statistics.
Referring to the output shown in the exhibit, which disk would be the problem?
- A. 0a.11.21
- B. 0a.11.19
- C. 0a.11.23
- D. 0a.13.21
Answer: B
NEW QUESTION 25
At a customer site, the storage failover giveback command fails when giving back the root aggregate.
What would be two reasons for this failure? (Choose two.)
- A. There are active SIS operations running.
- B. There are failed disks.
- C. There are active NFS connections.
- D. The HA interconnect is not operational.
Answer: B,D
NEW QUESTION 26
Which two statements are true about a data volume? (Choose two.)
- A. A data volume can be moved to any aggregate with space for it in the cluster.
- B. A data volume can be accessed by a user connected to any SVM.
- C. A data volume can be accessed by a LIF on any node.
- D. An SVM root or root load sharing mirror volume must be present on every node.
Answer: A,C
NEW QUESTION 27
A reboot was performed by a watchdog reset on the node.
In this scenario, which statement is true?
- A. The service processor no longer responds.
- B. The wafl_check command should be executed.
- C. In case of an L2 watchdog event, determine whether a core was dumped.
- D. In case of an L1 watchdog event, determine whether a panic message was recorded.
Answer: A
NEW QUESTION 28
Click the exhibit button.
You have just cabled a new shelf to a FAS8200. Running the system node run -node * sysconfig - a command indicates that multipath HA is configured. However, after running Config Advisor, you receive an error that your cabling is incorrect.
As indicated in the exhibit, which two actions will correct the cabling? (Choose two.)
- A. Move the 0b SAS connection on the bottom controller to 0d on the bottom controller.
- B. Move the 0b SAS connection on the top controller to 0d on the top controller.
- C. Move the 0b SAS connection on the top controller to 0d on the bottom controller.
- D. Move the 0b SAS connection on the bottom controller to 0d on the top controller.
Answer: A,B
NEW QUESTION 29
A customer called you after a failure in their Microsoft Hyper-V environment on the "SVM1" SVM. The customer wants to enable nondisruptive operations (NDO) to prevent future failures.
In this scenario, which two actions must be performed? (Choose two.)
- A. Verify that the continuously-available option is set on the CIFS share.
- B. Verify that the branchcache option is set on the CIFS share.
- C. Verify that SMB2 is enabled.
- D. Verify that SMB3 is enabled.
Answer: A,C
NEW QUESTION 30
Which statement is correct about the wafliron command?
- A. The wafliron command is used to correct parity inconsistencies.
- B. The wafliron command is used to correct WAFL i2p inconsistencies.
- C. The wafliron command is used to correct inconsistent user data blocks.
- D. The wafliron command is used to correct inconsistent WAFL metadata.
Answer: D
NEW QUESTION 31
You configured iSCSI multipathing on a Windows host to a 2-node ONTAP cluster so that you can attach to some LUNs. You see that the host logging in to both iSCSI LIFs in the ONTAP cluster, and you notice that the igroup is correctly set. After you open Disk Management and rescan for disks, the NetApp LUNs do not show up.
In this scenario, what should be performed to enable the LUNs to be visible to the Windows host?
- A. Configure the SVM for FCP and try scanning again.
- B. Set up LUN mapping and try scanning again.
- C. Set up Selective LUN Mapping (SLM) and try scanning again.
- D. Configure the ONTAP nodes for HA and try scanning again.
Answer: C
NEW QUESTION 32
......
NetApp NS0-592 Exam Certification Details:
| Recommended Training | ONTAP Troubleshooting (ILT) |
| Duration | 120 minutes |
| Exam Price | $150 USD |
| Exam Code | NS0-592 NCSE ONTAP |
| Number of Questions | 60 |
| Exam Name | Support Engineer ONTAP Specialist |
| Exam Registration | PEARSON VUE |
| Passing Score | 62% |
| Sample Questions | NetApp NS0-592 Sample Questions |
Pass Network Appliance NS0-592 Exam Quickly With ITexamReview: https://www.itexamreview.com/NS0-592-exam-dumps.html
