Mar 24, 2023 Step by Step Guide to Prepare for 1Y0-241 Exam BrainDumps
CCA-AppDS 1Y0-241 Real Exam Questions and Answers FREE Updated on 2023
For more info visit:
NEW QUESTION 23
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith "DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Response originated from "host.example.net" will be redirected to "host1.example.com".
- B. Response originated from "host1.example.net" will be redirected to "host.example.com".
- C. Request originated from "host.example.net" will be redirected to "host1.example.com".
- D. Request originated from "host1.example.net" will be redirected to "host.example.com".
Answer: D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/responder/diameter-support-responder.html
NEW QUESTION 24
Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packet- forwarding function based on the route table lookups?
- A. Layer 2
- B. MBF
- C. USIP
- D. Layer 3
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/configure- system-settings/configure-modes-packet-forwarding.html
NEW QUESTION 25
Scenario: A company has three departments with proprietary applications that need to be load balanced on a Citrix ADC. The three department managers would like to use the same IP address to access their individual applications. This would mean configuring three load-balanced vServers, all using the same IP address.
What can the Citrix Administrator configure for this scenario?
- A. Three different load-balanced vServers with three different IP addresses on a Citrix ADC
- B. Three different Citrix ADCs that use the same IP address
- C. Three SNIPs with the same IP address on a Citrix ADC
- D. Three different admin partitions that allow use of the same IP address for each load-balanced vServer on a Citrix ADC
Answer: C
NEW QUESTION 26
Which step can a Citrix Administrator take to use default compression policies?
- A. Enable compression on the associated bound services.
- B. Select the compression algorithm (gzip/deflate/identity).
- C. Bind the default compression policies to the vServer.
- D. Disable the Citrix ADC compression feature at a global level.
Answer: A
Explanation:
To put a compression policy into effect, you must bind it either globally, so that it applies to all traffic that flows through the Citrix ADC, or to a specific virtual server, so that the policy applies only to requests whose destination is the VIP address of that virtual server.
By default, compression is disabled on the Citrix ADC. You must enable the feature before configuring it. You can enable it globally so that it applies to all HTTP and SSL services, or you can enable it just for specific services.
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advanced-settings/enable-compression-on-service.htm
NEW QUESTION 27
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually - accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?
- A. Wait time
- B. Persistence threshold
- C. Request threshold
- D. Persistence time-Out
Answer: A
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advanced-settings/graceful-shutdown.html
NEW QUESTION 28
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image lazy loading
- B. Domain sharding
- C. Image shrink-to attributes
- D. Image optimization
Answer: D
Explanation:
Explanation
NEW QUESTION 29
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
- A. route
- B. bridge
- C. process
- D. drop
Answer: A
NEW QUESTION 30
Which Citrix ADC monitor can a Citrix Administrator use to check the authentication service of the Active Directory (AD) domain controller?
- A. An LDAP monitor with the LDAP Script Name, Configured Base DN, Bind DN, Filter, Attribute and Password parameters in the basic parameters.
- B. A ping monitor with the IP address of the AD domain controller in the special parameters
- C. A MYSQL-ECV monitor with the Base DN, Bind DN, Filter, Attribute, and Password parameters configured in the basic parameters
- D. A TCP monitor with the LDAP Base DN configured in the basic parameters.
Answer: A
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-builtin-monitors/monitor-ldap-services.html
NEW QUESTION 31
In an SSL offload deployment, which policy will allow a Citrix Administrator to modify all URLs in the response body from "http://" to "https://"?
- A. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"http://\"" -pattern "https://"
> add rewrite policy Pol1 trueAct1 NOREWRITE - B. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"https:\"" -pattern "http://"
> add rewrite policy Pol1 trueAct1 NOREWRITE - C. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"http:\"" -pattern "\https://\"
> add rewrite policy Pol1 trueAct1 NOREWRITE - D. > add rewrite action Act1 replace_all "HTTP.RES.BODY(200000)" "\"https //\"" -pattern "http://"
> add rewrite policy Pol1 trueAct1 NOREWRITE
Answer: B
NEW QUESTION 32
Which Citrix ADC platform offers an out-of-the-box multi-tenant solution?
- A. MPX
- B. SDX
- C. CPX
- D. VPX
Answer: B
NEW QUESTION 33
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?
- A. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto
"https://server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*" - B. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*" - C. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto
"https://server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*" - D. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
Answer: A
NEW QUESTION 34
Which profile can a Citrix Administrator create to configure a default profile that disables TLSv1?
- A. SSL
- B. DTLS
- C. TCP
- D. HTTP
Answer: A
NEW QUESTION 35
Scenario: Users are trying to access https://cs.mycompany.com, but are receiving the error below:
HTTP 503 Service Unavailable
What can a Citrix Administrator change in the Citrix ADC configuration to fix this?
- A. Bind a certificate.
- B. Enable the content switching feature.
- C. Disable the spillover redirect URL.
- D. Bind the default load-balancing vServer.
Answer: D
NEW QUESTION 36
Which step can a Citrix Administrator take to use default compression policies?
- A. Enable compression on the associated bound services.
- B. Select the compression algorithm (gzip/deflate/identity).
- C. Bind the default compression policies to the vServer.
- D. Disable the Citrix ADC compression feature at a global level.
Answer: B
NEW QUESTION 37
A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.
Which command does the administrator need to run to correctly configure this policy?
- A. SYS.CHECK.LIMIT(<limit_identifier>)
- B. SYS.CHECK.LIMIT(<limit_identifier>) || HTTP.REQ.LIMIT(<limit_identifier>)
- C. HTTP.REQ.LIMIT(<limit_identifier>)
- D. SYS.CHECK.LIMIT(<limit_identifier>) || CONNECTION.IP.LIMIT(<limit_identifier>)
Answer: A
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/rate-limiting/configuring-binding-traffic-rate-policy1.html
https://discussions.citrix.com/topic/398863-netscaler-rate-limiting-policy/
NEW QUESTION 38
......
Ultimate Guide to Prepare 1Y0-241 Certification Exam for CCA-AppDS: https://www.itexamreview.com/1Y0-241-exam-dumps.html
1Y0-241 Ultimate Study Guide: https://drive.google.com/open?id=1suPNEQ-KHbwrd_lLLVz7-ANv68-qmM8R
