Latest HPE6-A71 Pass Guaranteed Exam Dumps Certification Sample Questions
New HPE6-A71 Test Materials & Valid HPE6-A71 Test Engine
The HP HPE6-A71 (Aruba Certified Mobility Professional) Exam is designed for IT professionals who are interested in pursuing a career in wireless network administration. This certification is offered by Aruba Networks, a leading provider of wireless networking solutions for enterprises. The exam validates the knowledge and skills required to design, implement, and manage Aruba wireless networks.
NEW QUESTION # 82
Refer to the exhibit. An administrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADUIS AAA server authenticates clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from Controller B is 10.254.1.2.
By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?
- A. The user's session remains active, but the AAA server cannot implement RADIUS Change of Authorization (CoA).
- B. The user's session is disconnected and has to reconnect, but the S-UAC automatically updates the NAS-IP address on the AAA server to record the event.
- C. The user's session remains active and RADIUS messages can still be processed between the S-UAC and AAA server.
- D. The user's session is disconnected and has to reconnect, and no record of this process is stored on the AAA server.
Answer: A
Explanation:
Explanation
"The Authorization module authenticates clients on the A-UAC and sets the A-UAC IP address as the NAS-IP. External RADIUS servers set the NAS-IP as the A-UAC IP in the client database (Figure 6-17).
This NAS-IP is used later to change client states or attributes.However, when the client moves to a new UAC, the authentication server is not updated. This means that transactions initiated by the authorization server will fail.
To resolve this issue, you should configure each cluster member to use the Virtual Router Redundancy Protocol (VRRP), as described below. This enables interaction between the cluster and the authorization server. "
NEW QUESTION # 83
An administrator wants to deploy Zero Touch Provisioning (ZTP) with Activate. The controllers run ArubaOS.8.x.
Which Aruba architecture should the administrator deploy?
- A. Mobility Master-Mobility Controller
- B. AirWave
- C. Master-Local
- D. Standalone
Answer: A
NEW QUESTION # 84
An administrator implements a cluster of four Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM). An AP Group is configured with two VAPs and deployed to an AP thatwill connect to the cluster. Each AP contains two radios.
How many GRE tunnels will be built from the AP to the Active AP Anchor Controller (A-AAC)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 85
Where would an administrator define the split-tunneling mode for a RAP located at a branch office?
- A. the Firewall policy on the RAP
- B. the AAA policy on the controller
- C. the VAP profile on the controller
- D. the Firewall policy on the controller
Answer: A
NEW QUESTION # 86
An administrator wants to reduce downtime of the wireless network when controllers are upgraded. Which Aruba OS feature should the administrator implement to reduce the amount of downtime the Aps will experience at the time of the upgrade process?
- A. AP apboot mode bypass
- B. Centralized upgrades
- C. AP fast start
- D. AP image preload
Answer: D
NEW QUESTION # 87
What must the administrator configure on AirWave to monitor and run operational commands on the Aruba Mobility Masters (MMs) and Mobility Controllers (MCs)?
- A. SNMP and HTTPS
- B. PAPI and SNMP
- C. SNMP and SSH/telnet
- D. PAPI and SSH/telnet
Answer: C
NEW QUESTION # 88
Refer to the exhibit.
An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit.
-Zone A has six controllers that form a cluster.
-Zone B has three controllers that from a cluster.
-Zones C, D, and E have a single standalone controller each.
A total of 13 VAPs are created across the five zones. Azone needs to accept RAP connections form branch offices. All zones have the same AP Group name. One of the zones will not accept connections from the MultiZone APs.
Which could be a cause of this problem?
- A. RAPs are used in the configuration.
- B. The number of VAPs exceeds the maximum limit of 12 VAPs.
- C. AP Group names are different for each zone.
- D. The number of zones exceeds the maximum limit of four zones.
Answer: A
NEW QUESTION # 89
Refer to the exhibit.
An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit in this configuration:
-Zone A has six controllers that form a cluster.
-Zone B has three controllers that from a cluster.
-Zones C, D, and E have a single standalone controller each.
A total of 13 VAPs are created across the five zones. Aruba Mobility Controllers (MCs) in Zones A, B and C run ArubaOS 8.1.0.1 MCs in zones D and E run ArubaOS 8.1.0.2. Some APs do not join their respective data zones.
What could cause this problem?
- A. The number of controllers exceeds the maximum for MultiZone.
- B. The number of zones exceeds the maximum for MultiZone.
- C. The MCs run differentversions of the ArubaOS code.
- D. The number of VAPs exceeds the maximum for MultiZone.
Answer: C
NEW QUESTION # 90
Which VPN component must be configured on the Mobility Master (MM) to allow a RAP to use the built-in certificate to successfully connect to a Mobility Controller (MC)?
- A. IP Address pool
- B. CPSec auto-whitelist
- C. IPSec pre-shared key
- D. VPN username and password
Answer: B
NEW QUESTION # 91
An administrator manages an AirWave Management Platform (AMP). The AMP server receives many SNMP traps from managed devices, but no alerts are generated on the AMP for certain critical traps.
Which rule should the administrator create to cause the AMP server to generate an alert based on receipt of a critical SNMP trap from an Aruba Mobility Controller (MC)?
- A. Alert rule
- B. Trigger rule
- C. AMON rule
- D. SNMP trap rule
Answer: B
NEW QUESTION # 92
An administrator creates a user role that department A in a company uses. Various other roles exist for other departments. All employees connect to the same ESSID, which authenticates to an external AAA server.
How should the administrator configure the controller to assign the appropriate roles to the employees?
- A. Implement server-derived roles.
- B. Implement user roles.
- C. Implement default roles.
- D. Implement AAA profile roles.
Answer: B
NEW QUESTION # 93
Refer to the exhibit.
Under which AirWave Management Platform (AMP) section should an administrator navigate to see the connection status between the AMP and managed device shown in the exhibit?
- A. Device Setup
- B. Aps/Devices
- C. Folders
- D. VisualRF
Answer: B
NEW QUESTION # 94
Refer to the exhibit.
The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?
- A. The AP is configured as a RAP to terminate on a Mobility Master.
- B. The AP is configured to terminate on a Mobility Controller in a cluster.
- C. The AP is configured to terminate on a non-cluster Mobility Controller.
- D. The AP is configured as a RAP to terminate on a stand-alone controller.
Answer: A
NEW QUESTION # 95
Refer to the exhibit.
An administrator configures acluster with only the members shown in the exhibit. AP load balancing is enabled. There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?
- A. APs and clients are fully replicated.
- B. Connected users are de-authenticated
- C. APs reboot and rejoin the cluster.
- D. High value sessions are synchronized.
Answer: C
NEW QUESTION # 96
An administrator needs to support Unified Communications and Collaboration (UCC) in a company's network. The network infrastructure requires the OpenFlow protocol to support SDN-capable applications.
Which controller topology meets these requirements?
- A. Mobility Master-Mobility Controller
- B. Master-Local
- C. Zones
- D. Standalone Mobility Controller
Answer: A
NEW QUESTION # 97
Refer to the exhibit.
What is true about the configuration shown in the exhibit?
- A. This is an ArubaOS-Switch configured for per-user tunneled node.
- B. This is an ArubaOS controller configured for per-user tunneled node.
- C. This is an ArubaOS-Switch configured for per-port tunneled node.
- D. This is an ArubaOS controller configured for per-user tunneled node.
Answer: C
NEW QUESTION # 98
A company network implements Skype for Business, where voice and video calls, desktop sessions, and file sharing sessions need to be prioritized. These applications are used across a wireless network, implemented with Aruba APs and Aruba Mobility Controllers (MC) that run ArubaOS 8.x.
Which Unified Communications and Collaboration (UCC) deployment mode should an administrator recommend for this customer?
- A. Zones
- B. WMM-only
- C. Heuristics
- D. SDN API
Answer: D
NEW QUESTION # 99
......
HPE6-A71 Sample with Accurate & Updated Questions: https://www.itexamreview.com/HPE6-A71-exam-dumps.html
HPE6-A71 Updated Exam Dumps [2023] Practice Valid Exam Dumps Question: https://drive.google.com/open?id=1LkXxCy2nPm7GJAtvnsEP7aaeKQybZoY_
