HPE2-T37 Free Exam Study Guide! (Updated 117 Questions)
HPE2-T37 Dumps for HPE Product Certified - OneView [2022] Certified Exam Questions and Answer
HPE2-T37 certification exam is an excellent way for IT professionals to demonstrate their expertise in using HPE OneView. Using HPE OneView certification provides a valuable credential that can help professionals advance their careers and improve their job prospects. With the increasing demand for skilled IT professionals, obtaining the HPE ATP - Data Center Solutions V2 certification can help professionals stand out in a competitive job market.
HPE2-T37 certification exam is a professional-level exam offered by Hewlett Packard Enterprise (HPE) that assesses the skills and knowledge of individuals in using HPE OneView. HPE OneView is a management platform that streamlines the management of HPE infrastructure, including servers, storage, and networking devices. HPE2-T37 exam is designed for IT professionals who are responsible for managing HPE infrastructure and want to demonstrate their expertise in using HPE OneView.
HPE2-T37 exam consists of 40 multiple-choice questions that must be completed within an allotted time of 1 hour and 30 minutes. HPE2-T37 exam measures the candidate's understanding of a range of topics, including HPE OneView architecture, deployment and configuration, management and monitoring, and troubleshooting. Successful candidates will receive the HPE ASE - Synergy Solutions Integrator V1 certification, which demonstrates their expertise in using HPE OneView to manage and optimize IT infrastructure.
NEW QUESTION # 13
For each feature. indicate whether it is available with both hpe oneview Standard and hpe oneview Advanced licenses, or only with an hpe oneview Advanced license.
Answer:
Explanation:
NEW QUESTION # 14
Your customer has tried to delete a volume using HPE OneView interface, but the operation has failed. Which of the following statements would cause the operation to fail?
- A. This volume is marked as permanent.
- B. This volume is rebuilding after the drive failure.
- C. This volume is presented to the server.
- D. This volume has at least one snapshot created.
Answer: C
Explanation:
The operation to delete a volume using HPE OneView fails because the volume is presented to a server.
HPE OneView prevents deletion of volumes that are actively assigned to servers to avoid disrupting operations and data loss. Before deleting the volume, you must unassign it from any server profiles or disconnect it from the servers.
* Option A (Correct): Volumes in use cannot be deleted until they are detached.
* Option B: There is no "permanent" flag that prevents deletion.
* Option C: Having snapshots may prevent deletion on some storage systems, but HPE OneView primarily blocks deletion based on active assignments.
* Option D: A rebuilding volume might have restrictions, but the primary reason in this context is active presentation to a server.
NEW QUESTION # 15
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As an application running on the server with Windows system.
- B. As a physical appliance based on HPE ProLiant 360 Gen 10.
- C. As an application running on the server with CentOS Linux system
- D. As a virtual appliance running on the supported hypervisor.
Answer: D
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03934110
NEW QUESTION # 16
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.
Answer:
Explanation:
NEW QUESTION # 17
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
- B. Ensure that the Link Aggregation Group time-out value matches the server set values.
- C. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
- D. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
Answer: A
NEW QUESTION # 18
Which parameter is defined within an enclosure group for HPE Synergy?
- A. Interconnect type
- B. IL0 addressing method
- C. Power supply location
- D. Uplink set configuration
Answer: D
Explanation:
Within an enclosure group for HPE Synergy, you define the uplink set configuration. The enclosure group acts as a template that specifies how logical enclosures are to be configured, including network connectivity through uplink sets. Uplink sets define the mapping of networks to the physical ports on the interconnect modules, enabling consistent network configurations across multiple enclosures.
* Option B (Correct): Uplink set configurations are defined within the enclosure group to standardize network connectivity.
* Option A: Power supply location is not configured in the enclosure group.
* Option C: While interconnect modules are part of the enclosure group, the specific type is defined in the logical interconnect group.
* Option D: iLO addressing methods are set in the logical enclosure or server profiles, not in the enclosure group.
NEW QUESTION # 19
Which statement about an HPE OneView server profile is true?
- A. A server profile can be used to update firmware and drivers when the operating system on the server is up and running.
- B. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.
- C. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
- D. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
Answer: C
NEW QUESTION # 20
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are configured with a purpose other than General or Management.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are not configured with the required Smart Link parameter.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: B
NEW QUESTION # 21
Your customer runs VMware ESXi on an HPE Synergy platform. The ESXi systems must have access to 50 VLANs initially. However, this is a dynamic environment, and more VLANs will be added in the future.
They want to add more networks for virtual machines, but they do not want to modify the HPE Virtual Connect configuration.
Which type of the network should the customer define?
- A. Tunnel
- B. Untagged
- C. Tagged
- D. Internal
Answer: C
Explanation:
Virtual Connect will pass through all tagged packets without modification, and it will be the responsibility of the teaming software to strip/add tags.
NEW QUESTION # 22
What can De defined in a server profile for HPE Superdome Flex?
- A. Complex firmware baseline.
- B. nPartition configuration.
- C. Ethernet connections.
- D. BMC settings.
Answer: B
Explanation:
In a server profile for HPE Superdome Flex, you can define the nPartition configuration. HPE OneView allows administrators to manage nPartitions (nPars), which are hardware-based partitions providing electrical isolation between different partitions of the Superdome Flex server. This includes defining partition boundaries, assigning resources like CPUs and memory, and configuring boot options.
* Option B: While BMC settings are important, nPartition configurations are more specific to Superdome Flex profiles.
* Option C: Firmware baselines can be applied but are not unique to Superdome Flex server profiles.
* Option D: Ethernet connections are typically defined for standard servers, but nPartitioning is a key feature for Superdome Flex.
NEW QUESTION # 23
You need to make sure that server ports connected to this network cannot communicate with each other within the logical interconnect. Click the option within the network definition that will allow you to configure the required parameter.
Answer:
Explanation:
NEW QUESTION # 24
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. All of the components are up to date and compliant with firmware baseline.
- B. The firmware repository service must be restarted using maintenance connection.
- C. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- D. The firmware repository is not defined within firmware compliance report.
Answer: B
NEW QUESTION # 25
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution.
How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses for Logical Interconnects and Logical Enclosures
- B. to provide static IP addresses for storage systems managed in HPE OneView
- C. to provide static IP addresses to IL0 and interconnect modules if applicable
- D. to provide static IP addresses for an operating system running on a Compute Module
Answer: C
NEW QUESTION # 26
Which statement about the presented storage pools is true?
- A. All storage pools in managed state have a valid HPE OneView license applied
- B. Storage pools in discovered state can be removed from HPE OneView.
- C. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
- D. HPE OneView can be used to configure replication only between managed storage pools
Answer: C
NEW QUESTION # 27
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. The maximum supported number of the internal networks for logical interconnect is configured.
- B. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
Answer: A
NEW QUESTION # 28
Which statement about the volume template is true?
- A. A volume created using this template will not support deduplication
- B. Users will be able to change sharing type and volume capacity
- C. Users will be able to select storage pool during volume creation
- D. A volume created using this template mil not support snapshots
Answer: B
NEW QUESTION # 29
Which server profile template feature is available only for HPE Synergy compute nodes?
- A. Storage connection management
- B. Visualization of MACs and WWNs.
- C. Firmware and drivers update options.
- D. SAN storage management.
Answer: C
Explanation:
The server profile template feature available only for HPE Synergy compute nodes is the Firmware and drivers update options integrated with the HPE Image Streamer. This allows for:
* Stateless Computing: Deploy both firmware and operating system images rapidly.
* Driver Management: Simultaneous management of firmware and drivers through server profiles.
Unique to HPE Synergy:
* HPE Image Streamer: Exclusive to HPE Synergy, enabling deployment of OS images along with firmware updates.
* Enhanced Server Profiles: Include the ability to define the complete software stack in the server profile template.
NEW QUESTION # 30
You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?
- A. Imported volumes are treated as private volumes and can be only used as boot volumes
- B. Volumes imported to HPE OneView cannot be removed using the HPE OneView interface
- C. A snapshot for imported volumes can be created only by using array management tools
- D. Volumes imported to HPE OneView is managed just like a volume created using HPE OneView
Answer: D
Explanation:
https://atrium-consulting.uk/wp-content/uploads/2020/HPE-Synergy-Technical-Workshop-handout.pdf HPE OneView does not differentiate between volume created and volume added.
NEW QUESTION # 31
......
Use Real HPE2-T37 Dumps - 100% Free HPE2-T37 Exam Dumps: https://www.itexamreview.com/HPE2-T37-exam-dumps.html
Realistic Verified HPE2-T37 exam dumps Q&As - HPE2-T37 Free Update: https://drive.google.com/open?id=1uV9OLTvdL0RCf6_5fsMOHxcYGX6XmZDi
