HPE0-V14 Free Exam Study Guide! (Updated 290 Questions)
HPE0-V14 Dumps for HPE ATP - Hybrid IT Solutions V2 Certified Exam Questions & Answer
Who should take the HP HPE0-V14: Building HPE Hybrid IT Solutions Exam
Individuals should pursue the HPE0-V14 exam test if they want to demonstrate their expertise and ability to access and manage data to perform queries and analyses from HP HPE0-V14: Building HPE Hybrid IT Solutions Certification.
- Or anyone writing & interested in SAS programs
- HPE channel partners and HPE sales professionals
- Programmers
- Analysts
- Data managers
NEW QUESTION 66
A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?
- A. RoCE
- B. FCoE
- C. NPAR
- D. RDMA
Answer: C
Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/V2/getpdf.aspx/c04312719.pdf?ver=12
NEW QUESTION 67
What should you install with a server for a customer who may need to perform maintenance on the server while it is the rack? (Select two.)
- A. redundant PDUs
- B. Cable Management Arm (CMA)
- C. rack stabilization kit
- D. blanking panels
- E. high performance fan kit
Answer: B,C
NEW QUESTION 68
Which backup targets are available from an HPE StoreOnce backup system? (Choose two.)
- A. NVMe
- B. iSCSI
- C. S3
- D. VTL
- E. Catalyst
Answer: D,E
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03824941
NEW QUESTION 69
An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.
- A. HPE OneView Standard
- B. HPE iLO Amplifier Pack
- C. HPE ProLiant Support Pack
- D. HPE Smart Update Manager
Answer: D
Explanation:
Reference: https://www.hpe.com/us/en/servers/smart-update.html
NEW QUESTION 70
Match the feature to the lowest iLO5 license in which it is available
Answer:
Explanation:
Explanation
Last - last
3-2
1-1
3-3
NEW QUESTION 71
A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?
- A. HPE MSA 1040
- B. HPE Nimble HF20C
- C. HPE Nimble AF20
- D. HPE MSA 2052
Answer: C
Explanation:
https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00008274enw
NEW QUESTION 72
A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer's network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections.
The customer is already over budget and needs to keep costs down.
Which option should you recommend Tor connecting to the switch?
- A. 3m OM2 Fiber optic cables
- B. 3m Cat 6A Copper Cables
- C. 3m Direct Attached Copper Cables
- D. 3m OM3 Fiber Optic Cables
Answer: C
NEW QUESTION 73
Match each characteristic to the correct storage type.
Answer:
Explanation:
Explanation
ML / DL / DL / ML
Reference:
https://www.hpe.com/uk/en/product-catalog/servers/proliant-servers/pip.specifications.hpe-proliant- dl380-gen10-server.1010026818.html
NEW QUESTION 74
A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?
- A. Switch A: Passive; Switch B: Active
- B. Switch A: Passive; Switch B: Passive
- C. Switch A: Active; Switch B: Passive
- D. Switch A: Active; Switch B: Active
Answer: A
NEW QUESTION 75
What is a feature of the MSA 1050 that will help your Storage Customer better utilize storage resources?
- A. Triple+ parity RAID
- B. Automated Tiering
- C. 99.9999% guaranteed availability
- D. block, file, and object access
Answer: B
Explanation:
Reference:
https://h20195.www2.hpe.com/v2/getpdf.aspx/A00015961ENW.pdf?
NEW QUESTION 76
A customer is standardized on high-density, rack-mounted servers. They have an application that requires 3 six-drive RAID6 groups and redundant 10 Gb NICs.
What is the highest-density server that meets these customer requirements?
- A. DL380 Gen10
- B. DL360 Gen10
- C. DL580 Gen10
- D. BL460c Gen10
Answer: A
NEW QUESTION 77
You are reviewing a series of MSA2052 storage designs for a customer's remote locations. Their largest remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?
- A. 8 HPE MSA 2 TB drives, configured with RAID5
- B. 12 HPE MSA 2 TB drives, configured with RAID6
- C. 14 HPE MSA 2 TB drives, configured with RAID1
- D. 10 HPE MSA 2 TB drives, configured with RAID0
Answer: B
NEW QUESTION 78
Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?
- A. OneView Standard
- B. UEFI System Bios
- C. insight Diagnostics
- D. Smart Storage Administrator
Answer: C
NEW QUESTION 79
A customer needs to increase the availability and bandwidth of network connectivity to their servers.
Which switch feature meets the customer's needs?
- A. Link Aggregation and Control Protocol (LACP)
- B. Virtual Local Area Network (VLAN)
- C. Remote direct memory access over Converged Ethernet (RoCE)
- D. Jumbo frames
Answer: A
NEW QUESTION 80
What is an access port on an Ethernet switch?
- A. A port that carries untagged frames inside the network
- B. A port that carries multiple VLANs
- C. A port that carries FCP frames inside the network
- D. A port that is connected to an FCF
Answer: A
Explanation:
Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0102233
NEW QUESTION 81
Match the characteristic to the correct HPE ProLiant family.
Answer:
Explanation:
NEW QUESTION 82
When is it appropriate for a customer to implement HPE OneView Standard?
- A. To manage multiple servers
- B. To update firmware
- C. To monitor their services
- D. To enable the Advanced iLO license
Answer: C
Explanation:
Reference:
https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04111367.pdf
NEW QUESTION 83
A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:
Answer:
Explanation:
Explanation
NEW QUESTION 84
You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.
Answer:
Explanation:
NEW QUESTION 85
A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.
Answer:
Explanation:
Explanation
https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=c05158726#
NEW QUESTION 86
Refer to the exhibit.
You observed some high temperature alerts on a switch shown in the middle rack of the exhibit. The cooling in the data center is following best practices for the layout in the exhibit. The switch is an HPE 5945 series switch, and all the fans are operating normally. The switch is racked so that its ports face the rear of the rack. The administrator noticed the fan modules have red handles.
What should the administrator do to resolve the issue?
- A. Add additional fan modules to the switch.
- B. Replace the fan modules with port-to-power fan modules.
- C. Change the fan direction with the fan preferred direction command.
- D. Replace the fan modules with power-to-port fan modules.
Answer: C
NEW QUESTION 87
Exhibit:
Which HPE ProLiant Server meets the customer's requirements?
Which HPE ProLiant Server meets the customer's requirements?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 88
......
How to Prepare for HP HPE0-V14: Building HPE Hybrid IT Solutions Exam
Preparation Guide for HP HPE0-V14: Building HPE Hybrid IT Solutions Exam
Introduction
It was founded on November 1, 2015, as part of Hewlett Packard company’s scattering. HPE is a market-oriented organization that operates in two divisions: The Enterprise Group, which works in a range of servers, storage, networking, consultations, and services, and the Financial Service (FSS) Group, which is a leading global information technology organization, located in Santos, CA, and a global leader in business technology. HPE announced annual sales of $29 billion in FY2019 on October 31, down 5,57% from the previous time of year.
The split was arranged to change the name of the former Hewlett-Packard corporation into HP Inc. and convert it into a new business. HP kept the old HP machine and print company and its stock price background as well as the original Hewlett-Packard NYSE symbol; the Corporation trades under its ticker symbol: HPE. HP Inc. HPE’s income was marginally lower than that of HP Inc, according to the 2015 notes. In 2017, the Computer Science Company extended its Enterprise Services business to DXC technology. It also extended and combined the software business with Micro Focus. In 2018 Fortune 500, HPE was ranked No 107 among the largest US companies with total profits.
HP HPE0-V14: Building HPE Hybrid IT Solutions Exam Topics
Candidates must know the exam topics before they start preparation. Because it will help them in hitting the core. Our HPE0-V14 dumps will include the following topics:
Describe, differentiate, and apply industry-standard, foundational SMB architectures, and technologies
- Identify and explain industry-standard IT technologies used in small and medium-sized solutions and their use cases
Recommend and position HPE products, solutions, and appropriate services for use cases
- Given a use case, recommend the appropriate HPE products, solutions, and services to meet the business requirement
Evaluate customer environment, and plan and design solutions using the HPE portfolio to meet customer requirements
- Given customer requirements, design an HPE storage solution to meet those requirements
- Given customer requirements, design an HPE server solution to meet those requirements
- Given customer requirements, design an end-to-end, small to medium-sized HPE solution to meet those requirements
- Identify and describe planning, design, and sizing tools and when to use them.
- Given customer requirements, design an HPE network solution to meet those requirements.
Install, configure, and upgrade HPE solutions and their components and validate the implementation
- Given a solution, configure and validate the server, storage, and/or networking components including integrating subsystems.
- Install physical solution systems including racking, power, and cabling connections
Troubleshoot and remediate HPE solution components
- Identify the tools and methods to troubleshoot and remediate an HPE solution and when to use each tool and method
- Analyze, troubleshoot, and remediate HPE solutions including component integrations(server, storage, and networking)
Manage, monitor, administer, and operate HPE solutions and theircomponents
- Manage HPE solutions and subsystems to ensure the solution continues to meet customer requirements
Use Real HPE0-V14 Dumps - 100% Free HPE0-V14 Exam Dumps: https://www.itexamreview.com/HPE0-V14-exam-dumps.html
Realistic Verified HPE0-V14 exam dumps Q&As - HPE0-V14 Free Update : https://drive.google.com/open?id=1DIuMuU3ysD45PdH93atlAn0zd_fVPoh5
