Cisco 300-610 Real Exam Questions Test Engine Dumps Training With 120 Questions
300-610 Actual Questions Answers PDF 100% Cover Real Exam Questions
Other Study Options
For self-study, it is better to choose well-structured materials that ensure learning the topics one-by-one in a smooth manner. Amazon can also improve your learning with books like “How I Passed Designing Cisco Data Center Infrastructure Exam” by Rocismo Liolentz Publications. It is available in the form of Kindle edition and is focused on not just concepts of the exam but helpful test-taking tips and methodologies.
Which Skills Are Covered in the Exam?
This exam is an extensive one and tries to validate the test-takers’ skills in a broad range of topics. The prime focus is on data center infrastructure-related areas such as automation of networks, networking computing, and storage management. The details of the content are as follows:
1. Network Design
- Weightage allotted – 35%
This is the most widespread domain in Cisco 300-610 syllabus. It tries to educate the learner about evaluating options for Layer 2 and layer 3 connectivity. Topics like endpoint mobility, convergence, service insertion, IP mobility, and redundancy are covered here as well. In addition, the section requires candidates to be able to be knowledgeable about the details related to evaluating data center technologies like vPC, skills in assessing the available options for device & routing virtualization, such as VDC and VRF, and evaluating in-band and out-of-band options for management as well as work with redundancy.
NEW QUESTION 21
A network architect designs a high-availability architecture for the Cisco UCS Fabric Interconnects that are installed in a data center. The architecture must support clustering and redundancy.
Which architecture meets these requirements?
- A. dual connections from port L1 to L1 and one connection from port L2 to L2 with Ethernet cables
- B. dual connections from port L1 to L2 and one connection from port L2 to L1 with twinax cables
- C. dual connections from port L1 to L2 and one connection from port L2 to L1 with Ethernet cables
- D. dual connections from port L1 to L1 and one connection from port L1 to L1 with twinax cables
Answer: A
Explanation:
Reference:
ch10lvl1sec92/configuring-high-availability-clustering
NEW QUESTION 22
What is a design consideration when implementing FSPF?
- A. Routes are based on the domain ID.
- B. Routes are based on the distance vector protocol.
- C. FSPF runs on a per-chassis basis.
- D. FSPF runs only on F Ports.
Answer: A
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ fabric/nxos/cli_fabric/fspf.html
NEW QUESTION 23
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)
- A. vNIC policy
- B. boot policy
- C. LAN connectivity policy
- D. firmware policy
- E. scrub policy
Answer: A,C
NEW QUESTION 24
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
- A. 8-Gbps links and 10-Gbps links use 64B/66B encoding.
- B. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
- C. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
- D. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
Answer: D
Explanation:
Section: Compute Design
Explanation/Reference: https://www.iol.unh.edu/sites/default/files/knowledgebase/10gec/10GbE_Cl49.pdf
NEW QUESTION 25
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 26
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION 27
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION 28
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 29
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Updating
- B. Initial
- C. Primary
- D. Secondary
Answer: B
NEW QUESTION 30
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects?
(Choose two.)
- A. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
- B. The STP parameter configuration is supported.
- C. STP runs on the uplink ports of each VLAN, as defined by MSTP.
- D. STP runs on the server ports.
- E. The STP parameter configuration is unsupported.
Answer: A,E
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION 31
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:
All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.
Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.
Which Fabric Interconnect SAN operational mode meets these requirements?
- A. switch
- B. Fibre Channel
- C. end host
- D. NPIV
Answer: A
NEW QUESTION 32
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. Ethernet and unified ports on the same port channel
- B. VSS that has unified uplinks
- C. vPC that has unified uplinks
- D. cross-connections with pinning
Answer: C
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION 33
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. VPC+
- B. UDLD
- C. OSPF
- D. EVPN
Answer: D
NEW QUESTION 34
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
- A. proxy ARP
- B. HSRP
- C. IP redirects
- D. flow control
Answer: A
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX- OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
NEW QUESTION 35
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 36
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION 37
An engineer must design a Cisco UCS environment that will connection to a storage area network. The solution must include support for these conditions:
* connectivity to the existing 10 Gigabit Ethernet network
* booting the server infrastructure from the network
* integration with the existing Fibre Channel storage arrays
* lossless data transfer
Which solution should be used to meet these requirements?
- A. FCoE
- B. NFS
- C. FCP
- D. CIFS
Answer: A
NEW QUESTION 38
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
- A. SAN port channel
- B. vPC+
- C. E-Trunk
- D. LACP port channel
Answer: D
NEW QUESTION 39
What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)
- A. It operates at the customer-facing services layer and provides the management interface for the virtual network devices.
- B. It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.
- C. It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.
- D. It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.
- E. It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.
Answer: C,D
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/msx/3_4/solution_overview/ Cisco_VMS_Sol_Overview.pdf
NEW QUESTION 40
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 9000 bytes
- B. 2240 bytes
- C. 2158 bytes
- D. 2000 bytes
Answer: D
NEW QUESTION 41
......
In Conclusion
Pass 300-610 exam along with the core test 350-601, and the CCNP Data Center certificate will be yours! Allocate some time to scrutinize the official outline and create a study plan — good preparation is a key to success in the test. Use training options offered by the vendor itself, supplement them with credible third-party materials, and your knowledge will help you ace the exam and perform well in the workplace then.
ITexamReview 300-610 Exam Practice Test Questions : https://www.itexamreview.com/300-610-exam-dumps.html
300-610 Exam questions and answers: https://drive.google.com/open?id=150FRGkm4QhxSvkVe4Jzz0e02NI0lLOWu
