Buy Latest Oct 28, 2021 ACMA-6.3 Exam Q&A PDF - One Year Free Update
Download the Latest ACMA-6.3 Dump - 2021 ACMA-6.3 Exam Questions
NEW QUESTION 30
View the Server group and User Roles screen shots above.
A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of "employee". The user was placed in the guest Role. What statements below are correct? (Choose two)
- A. The user was placed in the initial Role guest
- B. Role derivation failed because roles are case sensitive
- C. 802.1x authentication failed so the user was automatically placed in the guest Role
- D. The user was placed in the 802.1x authentication default Role guest
- E. Role derivation failed because the incorrect operation "value-of" was used
Answer: B,D
NEW QUESTION 31
A reboot of the controller is necessary in which of the following scenarios? (Select two)
- A. Changing of Controller Role
- B. Changing controller IP
- C. Extending a license range
- D. Creating of a new AP Group
- E. Changing the VLAN of a Virtual AP Profile
Answer: A,B
NEW QUESTION 32
Identify the benefits of using aliases when writing firewall policies (Select three)
- A. End users are applied to the proper role.
- B. Changes to policy rules that use aliases are auto updated.
- C. Simplifies repetitive configuration.
- D. Can be applied to a Role
- E. Makes policies more readable.
Answer: B,C,E
NEW QUESTION 33
Which of the following parameters is not needed by Visual RF Plan in order to Plan APs on a floor region?
- A. Environment
- B. AP Type
- C. PHY Type
- D. Desired Data Rate
- E. Distance to Controller
Answer: E
NEW QUESTION 34
Which of these are supported by the Aruba Controller? (Select two)
- A. AES Encryption
- B. HSRP
- C. SNMP
- D. BGP
- E. Blowfish encryption
Answer: A,C
NEW QUESTION 35
What information is required by an AP in order to boot? (Select three)
- A. An established NTP connection to the Master Controller
- B. AP's Name and Group
- C. AP's IP Address, Netmask, Default Gateway
- D. Aruba Controller's Master IP Address
- E. Establish an IPSEC tunnel with the Master controller
Answer: B,C,D
NEW QUESTION 36
Which of the following is true of an Aruba Mobility Controller acting as a layer 2 switch? (Select two):
- A. The Mobility Controller is the client's default router.
- B. All stations must use the same VLAN
- C. The Mobility Controller acts as a bridge.
- D. VLANs cannot have IP addresses
- E. Uplink ports on the Mobility Controller can use 802.1q tagging
Answer: C,E
NEW QUESTION 37
Which of the following is true about configuring a server group?
- A. If multiple servers are assigned to the server group, all except the 1st will be ignored
- B. Server rules are used to send information to the configured servers
- C. If the internal database is used in the server group, then no external servers can be added
- D. All the servers in a server group will be used round robin style
- E. A server group can have more than 1 server
Answer: E
NEW QUESTION 38
What is NOT a basic configuration in the startup wizard when configuring a WLAN?
- A. Firewall Role
- B. Radio Type
- C. VLAN
- D. Antenna Type
- E. SSID
Answer: D
NEW QUESTION 39
When configuring the Mobility Controller's internal DHCP via the startup wizard which option is NOT available for configuration (select two)?
- A. Netbios name server
- B. Domain name
- C. Pod name
- D. Default router
- E. Option 43
Answer: C,E
NEW QUESTION 40
View the Server group screen shot above.
A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x authentication at both locations. The user's credentials are only found in the Miami Radius server "RadiusMiami". There is no Radius synchronization and both servers are reachable. What happens when the user attempts to authenticate?
- A. RadiusNY1 receives the request and returns a deny. The authentication request will then be sent to RadiusMiami.
- B. The controller recognizes the users Domain and sends the authentication request directly to RadiusMiami.
- C. The RadiusNY1 sends the request to RadiusMiami that replies to the controller
- D. The request is initially sent to RadiusNY1 then RadiusNY1 redirects the controller to send the authentication request to RadiusMiami
- E. RadiusNY1 receives the request and returns a deny. No other action is taken.
Answer: E
NEW QUESTION 41
The AP Wizard allows the selection of APs to be provisioned using which of the following methods (Select three):
- A. APs designated as Air Monitors
- B. All APs
- C. APs in particular AP Group
- D. APs meeting specified search criteria
- E. APs of a specific type
Answer: B,C,D
NEW QUESTION 42
A wired device is connected to an untrusted port on a controller. How can a role be assigned to the device?
- A. The Role assigned to the untrusted port
- B. An initial Role can be assigned directly to the VLAN
- C. Adding a wired AAA profile to a VLAN on the untrusted port
- D. Roles are assigned to devices connected to a trusted port
- E. A default Role can be directly assigned to an untrusted port
Answer: C
NEW QUESTION 43
What Controller modes of operation are available from the startup wizard (Select three)?
- A. Backup controller
- B. Standalone
- C. Primary
- D. Local
- E. Master
Answer: B,D,E
NEW QUESTION 44
Which of the following is NOT available for configuration in the startup wizard?
- A. WPA-PSK encryption
- B. Native VLANs on a per port basis
- C. Administrator and enable passwords
- D. Radius Server
- E. RF Plan
Answer: E
NEW QUESTION 45
802.11n APs operate in which bands? (Select two)
- A. 5 GHz
- B. 2.4 MHz
- C. 900 MHz
- D. 5 MHz
- E. 2.4 GHz
Answer: A,E
NEW QUESTION 46
When a barcode scanner connects to an AP, what is the 1st role that is assigned to it?
- A. 802.1X default role
- B. Initial role
- C. User derived Role
- D. Server derived role
- E. MAC authentication default role
Answer: B
NEW QUESTION 47
Which of the following can be configured in the GUI setup wizard? (Select three)
- A. WLAN
- B. timezone
- C. DHCP Option 43
- D. VLAN
- E. Loopback address
Answer: A,B,D
NEW QUESTION 48
Which method can APs use to discover a controller?
- A. HTTPS
- B. PAPI
- C. Dynamic DNS (DDNS)
- D. DHCP
- E. PnP
Answer: D
NEW QUESTION 49
What is the IP address of the controller when using the startup wizard?
- A. 192.168.1.1
- B. 172.16.0.254
- C. 172.16.0.1
- D. 10.1.10.100
- E. 10.1.1.1
Answer: B
NEW QUESTION 50
Which role is assigned prior to launching the captive portal splash screen?
- A. AAA-CP role
- B. CP default role
- C. Post-authentication role
- D. Pre-authentication role
- E. AAA role
Answer: D
NEW QUESTION 51
When configuring roles under 'Access Control' in the Controller's Configuration page, what does the 'show reference' action tell us?
- A. Which profiles refer to the role
- B. What users are currently assigned that role
- C. What authentication methods use Roles with these policies
- D. Which firewall hits were detected that refer to the role
- E. What policies are inside the role
Answer: A
NEW QUESTION 52
......
Verified ACMA-6.3 Dumps Q&As - 1 Year Free & Quickly Updates: https://www.itexamreview.com/ACMA-6.3-exam-dumps.html
Latest Aruba ACMA-6.3 Certification Practice Test Questions: https://drive.google.com/open?id=1tVXZgzZOJ0vJFaafxpemycjWQwIWk1mx
