[Apr-2023] Valid Way To Pass HP Exam Dumps with HPE0-J58 Exam Study Guide
All HPE0-J58 Dumps and Designing Multi-Site HPE Storage Solutions Training Courses Help candidates to study and pass the Exams hassle-free!
NEW QUESTION 51
A customer established a remote site with an HPE 3PAR 2O0O0 array and wants to implement Remote Copy tor data protection The environment has these specifications
* Two locations of arrays are less than 1 km apart
* The locations are limited to an existing shared link that cannot be upgraded
* Data only changes on a weekly basis, but needs to be available if the primary site fails.
Based on this information. which type of replication mode meets all these needs?
- A. Asynchronous Periodic
- B. Asynchronous Streaming
- C. Synchronous
- D. Synchronous Long Distance
Answer: C
NEW QUESTION 52
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
- B. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- C. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
- D. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
Answer: A
Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8914ENW.pdf
NEW QUESTION 53
A customer has a Tier 1 application that has high bandwidth and is sensitive to latency.
The customer needs a solution to support this application. The solution must support replication between two sites over dark fiber links and support an RPO of zero.
Which solution meets the customer requirements?
- A. dual HPE 3PAR 9450 arrays with data replicated using RCFC
- B. dual Nimble HF20 arrays with data replicated over iSCSI
- C. dual Nimble AF40 arrays with data replicated over FC
- D. dual HPE 3PAR 8400 arrays with data replicated using iSCSI
Answer: A
NEW QUESTION 54
A customer recently acquired another company located less than three km from their current main location.
Both locations use HPE D-Series products in their storage environments.
The customer needs to merge the two locations while still using the current WAN and networking infrastructure at both locations. They need to Keep the initial cost down until they are able to redesign both networking infrastructures When providing a proposal, which protocol should be incorporated to meet the customer needs?
- A. ISCSI
- B. DWDM
- C. CWDM
- D. FCIP
Answer: C
NEW QUESTION 55
You are starting an assessment to design a new multi-storage environment for a customer. You have collected data on all the current arrays using SAF collector.
What should be the next step in your design process?
- A. Open the .zip file with NinjaSTARS
- B. Send the .zip file to [email protected]
- C. Import the .zip file into OCA
- D. Upload the .zip file to the SAF Portal
Answer: D
NEW QUESTION 56
Refer to the exhibit.
A customer is planning a new compute cluster. They require business continuity, and they need automatic transparent failover between sites with an RPO of 0.
You propose HPE 3PAR 9450 arrays at each site. The displayed Bill of Materials (BOM) shows the hardware and software components for one site.
What must be added to the BOM at each site to build the solution?
- A. two additional HPE 3PAR 9000 2-port 10Gb Ethernet Host Bus Adapters
- B. one HPE 3PAR All-inclusive Multi-system Software Suite
- C. one HPE 3PAR Policy Manager Software license
- D. four additional HPE 3PAR 9000 4-port 16Gb Fiber Channel Host Bus Adapters
Answer: C
NEW QUESTION 57
A customer needs to analyze performance and capacity of their storage environment. Their environment
consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?
- A. SAF Collect
- B. HPE Infosight
- C. DD Analyzer
- D. NinjaCrawler
Answer: A
NEW QUESTION 58
Match the HPE resource to Its source location.
Answer:
Explanation:
NEW QUESTION 59
You are presenting a Remote Copy solution to a customer that expects to experience significant future growth During your presentation, the customer expresses concerns about future integrations of HPE 3PAR arrays into the replication solution.
How should you respond to address the customer concern?
- A. Asynchronous Streaming replication is available on all generations of HPE 3PAR arrays.
- B. Only HPE 3PAR 20000 arrays can be a replication target for 8000. 9000, and 20000 arrays.
- C. HPE 3PAR 8000 arrays can only replicate to other HPE 3PAR 8000 and HPE 3PAR 7000 arrays.
- D. All current and previous generation HPE 3PAR arrays can replicate data between each other
Answer: D
NEW QUESTION 60
A customer wants to enable an automated failover for their two existing HPE 3PAR solutions, which are located in two different sites. Each solution has an All-inclusive Single-System Software license.
Which component is required to enable this function?
- A. Dark fibre connection between the sites
- B. Fibre channel Bridges to connect the disk shelfs
- C. All-inclusive Multi-System Software License
- D. Additional HPE 3PAR system as quorum witness
Answer: C
NEW QUESTION 61
Refer to the exhibit.
A customer has the environment shown. They currently perform application-consistent daily full backups via Veeam backup to an HPE StoreOnce device. These backups are then replicated to an alternate device using Catalyst copy.
Changing business requirements have mandated the RPO and RTO for the customer's SQL databases be reduced to 15 minutes. Due to the size of the databases, it is not possible to meet this requirement with their existing backout application.
What should you recommend the customer implement in order to meet their new requirement?
- A. HPE 3PAR Remote Copy in Asynchronous Streaming Mode
- B. HPE 3PAR Remote Copy in Synchronous Mode
- C. HPE RMC Express Protect
- D. SPE StoreOnce Cloud Bank
Answer: A
NEW QUESTION 62
A customer Is experiencing high utilization on VMware ESXi server NICs when backing up virtual machines stored on an HPE 3PAR 8200.
Which technology is available on a StoreOnce VSA to reduce the network utilization?
- A. adaptive data reduction
- B. catalyst target-side deduplication
- C. backup from storage snapshots
- D. transportable shadow copies
Answer: B
NEW QUESTION 63
A customer deployed an HPE 3PAR 8200 and an HPE 3PAR 8400 array Peer persistence is configured between them All remote copy links are lost, Out connection to the Quorum witness is maintained by Doth arrays.
Immediately after the remote copy links are restored, the customer reports they cannot perform a manual switchover for maintenance in SSMC
What is causing this issue'
- A. Peer Persistence is designed for Automatic Transparent Failover and must be disabled to perform a manual switchover.
- B. A manual switchover cannot be performed until the volumes are resynced.
- C. Manual switchover is not supported between arrays of different models
- D. Manual switchover cannot be performed if the arrays are running different firmware versions
Answer: A
NEW QUESTION 64
A customer's primary and OR datacenter are over 700 km apart. The customer wants to minimize data loss during a OR failover, but is worried about the potential production IO performance impact of replicating their data.
You recommend HPE 3PAR asynchronous replication.
Which key factor should you explain about the proposed solution?
- A. Most writes are acknowledged as soon as they are performed on both the primary and secondary storage array
- B. Host writes are acknowledged as soon as they are performed on the primary storage array
- C. All writes are written to the target
- D. Host write latencies win increase
Answer: B
NEW QUESTION 65
A customer experiences a performance issues and blames the HPE 3PAR array. However, you suspect it is caused by a noisy neighbor situation in the VMware environment. Which approach should you use to find and prove a root cause?
- A. Use the advanced performance reports in SSMC
- B. Use Brocade Network Advisor to gather data for analysis
- C. Use HPE InfoSight Cross Stack Analytics
- D. Use HPE SAF Collect to gather data for SAF Analyze
Answer: A
NEW QUESTION 66
You are using NinjaStars to develop a proposal to refresh a customer's storage infrastructure.
Which information is needed from the existing environment to properly design a solution? (Select two.)
- A. response time
- B. total IOPS
- C. visualization ratio
- D. RAID type
- E. number of Installed controllers
Answer: B,D
NEW QUESTION 67
A customer needs to prevent a Fibre Channel switch from being connected to the current SAN infrastructure and accidentally joining the fabric.
What should be implemented on the customer SAN switches to prevent this occurrence?
- A. Switch connection control
- B. DH-CHAP
- C. Fabric configuration server
- D. IPFilter
Answer: B
NEW QUESTION 68
......
HP HPE0-J58 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Real Exam Questions and Answers - HP HPE0-J58 Dump is Ready: https://drive.google.com/open?id=1gTQyMvRtGcMS6AgkMEE-2AhDdAT2TcZk
Get Latest [Apr-2023] Conduct effective penetration tests using ITexamReview HPE0-J58: https://www.itexamreview.com/HPE0-J58-exam-dumps.html
