[2022] Pass 300-710 Exam - Real Questions and Answers
300-710 Exam Questions Get Updated [2022] with Correct Answers
Targeted Audience Profile
Anyone who wants to explore Cisco security concepts and technologies can take-up this exam and hone their competence a little bit more. Skills intensification is going to be proved a game-changer for in-service professionals like Cisco integrators, security administrators, consultants, and technical support experts. Also, network admins and system engineers are perfect for this test.
How much Securing Networks with Cisco Firepower (300-710 SNCF) Exam Cost
The cost of this exam is USD $300 but prices for Cisco examinations differ according to level and currency. Also exam vouchers can be used for discounts. To find out the cost of your test, click here and choose your country. To learn about prices and locations, visit the CCIE Lab Exam page
NEW QUESTION 50
What is the role of the casebook feature in Cisco Threat Response?
- A. pulling data via the browser extension
- B. sharing threat analysts
- C. alert prioritization
- D. triage automaton with alerting
Answer: B
Explanation:
The casebook and pivot menu are widgets available in Cisco Threat Response. Casebook - It is used to record, organize, and share sets of observables of interest primarily during an investigation and threat analysis. You can use a casebook to get the current verdicts or dispositions on the observables.
https://www.cisco.com/c/en/us/td/docs/security/ces/user_guide/esa_user_guide_13-5-1/b_ESA_Admin_Guide_ces_13-5-1/b_ESA_Admin_Guide_13-0_chapter_0110001.pdf
NEW QUESTION 51
Which command must be run to generate troubleshooting files on an FTD?
- A. show tech-support
- B. system support view-files
- C. sudo sf_troubleshoot.pl
- D. system generate-troubleshoot all
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote-SourceFire-00.html
NEW QUESTION 52
A mid-sized company is experiencing higher network bandwidth utilization due to a recent acquisition The network operations team is asked to scale up their one Cisco FTD appliance deployment to higher capacities due to the increased network bandwidth. Which design option should be used to accomplish this goal?
- A. Deploy multiple Cisco FTD HA pairs to increase performance
- B. Deploy multiple Cisco FTD appliances in firewall clustering mode to increase performance.
- C. Deploy multiple Cisco FTD HA pairs in clustering mode to increase performance
- D. Deploy multiple Cisco FTD appliances using VPN load-balancing to scale performance.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/ftd-cluster-solution.html#concept_C8502505F840451C9E600F1EED9BC18E
NEW QUESTION 53
A network engineer sets up a secondary Cisco FMC that is integrated with Cisco Security Packet Analyzer What occurs when the secondary Cisco FMC synchronizes with the primary Cisco FMC?
- A. The existing configuration for integration of the secondary Cisco FMC the Cisco Security Packet Analyzer is overwritten.
- B. The secondary Cisco FMC must be reintegrated with the Cisco Security Packet Analyzer after the synchronization
- C. The synchronization between the primary and secondary Cisco FMC fails
- D. The existing integration configuration is replicated to the primary Cisco FMC
Answer: A
NEW QUESTION 54
Within Cisco Firepower Management Center, where does a user add or modify widgets?
- A. reporting
- B. context explorer
- C. summary tool
- D. dashboard
Answer: D
NEW QUESTION 55
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- B. Cisco Firepower automatically updates the policies.
- C. The administrator manually updates the policies.
- D. Cisco Firepower gives recommendations to update the policies.
Answer: D
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION 56
An organization is migrating their Cisco ASA devices running in multicontext mode to Cisco FTD devices. Which action must be taken to ensure that each context on the Cisco ASA is logically separated in the Cisco FTD devices?
- A. Add a native instance to distribute traffic to each Cisco FTD context.
- B. Add the Cisco FTD device to the Cisco ASA port channels.
- C. Configure the Cisco FTD to use port channels spanning multiple networks.
- D. Configure a container instance in the Cisco FTD for each context in the Cisco ASA.
Answer: B
NEW QUESTION 57
A network administrator notices that inspection has been interrupted on all non-managed interfaces of a device. What is the cause of this?
- A. The value of the highest MSS assigned to any non-management interface was changed.
- B. Multiple inline interface pairs were added to the same inline interface.
- C. The value of the highest MTU assigned to any non-management interface was changed.
- D. A passive interface was associated with a security zone.
Answer: C
NEW QUESTION 58 
Refer to the exhibit. An engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network. How is the Firepower configuration updated to protect these new operating systems?
- A. Cisco Firepower automatically updates the policies.
- B. The administrator manually updates the policies.
- C. Cisco Firepower gives recommendations to update the policies.
- D. The administrator requests a Remediation Recommendation Report from Cisco Firepower.
Answer: C
Explanation:
Section: Management and Troubleshooting
NEW QUESTION 59
A company has many Cisco FTD devices managed by a Cisco FMC. The security model requires that access control rule logs be collected for analysis. The security engineer is concerned that the Cisco FMC will not be able to process the volume of logging that will be generated. Which configuration addresses this concern?
- A. Send Cisco FTD connection events and security events to a cluster of Cisco FMC devices for storage and analysis.
- B. Send Cisco FTD connection events and security events directly to SIEM system for storage and analysis.
- C. Send Cisco FTD connection events and security events to Cisco FMC and configure it to forward logs to SIEM for storage and analysis.
- D. Send Cisco FTD connection events directly to a SIEM system and forward security events from Cisco FMC to the SIEM system for storage and analysis.
Answer: B
NEW QUESTION 60
Which two actions can be used in an access control policy rule? (Choose two.)
- A. Monitor
- B. Discover
- C. Block with Reset
- D. Analyze
- E. Block ALL
Answer: A,C
NEW QUESTION 61
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service? (Choose two.)
- A. outbound port TCP/443
- B. inbound port TCP/80
- C. outbound port TCP/8080
- D. inbound port TCP/443
- E. outbound port TCP/80
Answer: A,E
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Security__Internet_Access__and_Communication_Ports.html
NEW QUESTION 62
An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of 10
10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?
- A. Update the IP addresses from IFV4 to IPv6 without deleting the device from Cisco FMC
- B. Delete and reregister the device to Cisco FMC
- C. Format and reregister the device to Cisco FMC.
- D. Cisco FMC does not support devices that use IPv4 IP addresses.
Answer: A
NEW QUESTION 63
When deploying a Cisco ASA Firepower module, an organization wants to evaluate the contents of the traffic without affecting the network. It is currently configured to have more than one instance of the same device on the physical appliance Which deployment mode meets the needs of the organization?
- A. inline tap monitor-only mode
- B. passive monitor-only mode
- C. inline mode
- D. passive tap monitor-only mode
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa910/configuration/firewall/asa-910-firewall-config/access-sfr.html Inline tap monitor-only mode (ASA inline)-In an inline tap monitor-only deployment, a copy of the traffic is sent to the ASA FirePOWER module, but it is not returned to the ASA. Inline tap mode lets you see what the ASA FirePOWER module would have done to traffic, and lets you evaluate the content of the traffic, without impacting the network. However, in this mode, the ASA does apply its policies to the traffic, so traffic can be dropped due to access rules, TCP normalization, and so forth.
NEW QUESTION 64
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service?
(Choose two.)
- A. outbound port TCP/443
- B. inbound port TCP/80
- C. outbound port TCP/8080
- D. inbound port TCP/443
- E. outbound port TCP/80
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Securit
NEW QUESTION 65
......
Practice 300-710 Questions With Certification guide Q&A from Training Expert ITexamReview: https://www.itexamreview.com/300-710-exam-dumps.html
Free Cisco 300-710 Test Practice Test Questions Exam Dumps: https://drive.google.com/open?id=1dhAsgZYCgdAP0kIMhr0vogqBL5jwpzhi
