1Y0-440 Dumps 2022 - New Citrix 1Y0-440 Exam Questions
Free 1Y0-440 braindumps download (1Y0-440 exam dumps Free Updated)
The Citrix 1Y0-440 exam comprehensively addresses advanced knowledge of architecting and networking concepts along with Citrix ADC. It is most suited to the candidates with proven experience in managing and provisioning the Citrix ADC solutions with an aim to streamline business operations. It verifies that a particular applicant is well-conversant with the general architecture of a Citrix networking environment and brings the Citrix CCE-AppDS certification. In a majority of modern workspaces, individuals with such a certificate who are tasked with assessing or designing the Citrix Network architecture may assume the roles of Citrix Consultants, Citrix Architects, or Citrix Engineers, among the rest.
Recommended Training
Although it is not a strict requirement, 1Y0-440 exam will benefit a lot from completing the official training course. It allows one to gain the relevant hands-on experience in Architecting Citrix Networking Solutions before taking this test. The recommended program is CNS-420: Citrix Networking Assessment, Design, and Advanced Configuration.
This course validates one’s mastery of advanced Citrix ADC configurations and concepts. It is an expert-level training program that runs for 5 days and makes applicants ready to carefully evaluate the environmental constraints, requirements, and business initiatives to design complex Citrix networking solutions. By assessing your skills using this training, you will find out weak areas as well as will strengthen them. Also, you will have a good grasp of the most crucial topics to help you become a Citrix certified architect, engineer, or consultant. These include advanced concepts of load balancing, authentication, orchestration, multitenant and multisite deployments, troubleshooting, and automation. The vendor also offers an annual package subscription that enables candidates to get all study materials in one place.
NEW QUESTION 65
Which step does a Citrix Architect need to ensure during the Define phase when following the Citrix Methodology?
- A. Testing steps were integrated.
- B. The project manager agrees with road map timelines.
- C. A phased roll out was completed.
- D. The redundancy deployment decision was made.
- E. Existing networking infrastructure is ready.
Answer: D
NEW QUESTION 66
Scenario: A Citrix Architect needs to design a new multi-datacenter Citrix ADC deployment. The customer wants Citrix ADC to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment. Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment based on the stated requirements?
- A. Least response time
- B. Static proximity
- C. Dynamic round trip time (RTT)
- D. Source IP hash
- E. Least connections
- F. Least packets
Answer: B
NEW QUESTION 67
Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway, Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to NMAS 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.
The following requirements were discussed during the implementation:
* All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration
* All traffic should be secured and any traffic coming into HTTP should be redirected to HTTPS.
* Single Sign-on should be created for Microsoft Outlook web access (OWA).
* NetScaler should recognize Uniform Resource Identifier (URl) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.
* Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.
* The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL Which monitor will meet these requirements?
- A. add lb monitor mon_rpc HTTP-ECV -send "GET/rpc/healthcheck.htm" recv 200 -LRTM DISABLED - secure YES
- B. add lb monitor mon_rpc HTTP -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED -secure YES
- C. add lb monitor mon_rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM ENABLED
- D. add lb monitor mon_rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED
Answer: D
NEW QUESTION 68
Which four load-balancing methods support NetScaler Virtual Server-Level Slow Start? (Choose four.)
- A. Least Connection
- B. Least bandwidth
- C. Least response time
- D. URLHash
- E. Token
- F. Least Packets
- G. SRCIPSRCPORTHash
Answer: A,B,C,F
NEW QUESTION 69
Scenario: A Citrix Architect needs to assess an existing NetScaler multi-site deployment. The deployment is using Global Server Load Balancing (GSLB) configured in a parent-child configuration.
Click the Exhibit button to view the diagram of the current GSLB configuration and parent-child relationships, as well as the status of the sites and the connectivity between them.
Based on the displayed configuration and status, Child_site1_______ a connection from _______. (Choose the correct option to complete the sentence.)
- A. does NOT receive; SiteP2 and SiteP3; remains a child site of SiteP1
- B. rejects; SiteP3; remains a child site of SiteP1
- C. accepts; SiteP3; becomes its child site
- D. rejects; SiteP2 and SiteP3; remains a child site of SiteP1
- E. accepts; SiteP2; becomes its child site
- F. rejects; SiteP2; remains a child site of SiteP1
Answer: E
NEW QUESTION 70
Which session parameter does the default authorization setting control when authentication, authorization, and auditing profiles are configured?
- A. Determines the default period after which the user is automatically disconnected and must authenticate again to access the intranet
- B. Controls are amount of time the users can be idle before they are automatically disconnected.
- C. Determines whether the Citrix ADC appliance will allow or deny access to content for which there is no specific authorization policy
- D. Determines the default logging level
- E. Determines whether the Citrix ADC appliance will use primary or the secondary authentication for SSO
- F. Determines whether the Citrix ADC appliance will log users onto all web applications automatically after they authenticate or will pass users to the web application logon page to authenticate for each application.
Answer: C
NEW QUESTION 71
Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a Citrix ADC design project. They captured the following requirements from this design discussion:
* All three (3) Workspacelab sites (DC, NOR, and DR) will have similar Citrix ADC configurations and design.
* The external Citrix ADC MPX1 appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Active mode.
* ADNS service should be configured on the Citrix ADC to make it authoritative for domain nsg.workspacelab.com * In GSLB deployment, the DNS resolution should be performed to connect the user to the site with least network latency.
* On the internal Citrix ADC, load balancing for StoreFront services, Citrix XML services, and Citrix Director services must be configured.
* On the external Citrix ADC, the Gateway virtual server must be configured in ICA proxy mode.
Click the Exhibit button to view the logical representation of the network.
On which firewall should the architect configure the access policy to permit the MEP communication between the sites?
- A. Checkpoint FW1 and DMZ ASA Firewall
- B. CISCO IPS and CISCO IPS1
- C. CISCO IPS 1 and Checkpoint FW1
- D. CISCO IPS and Checkpoint FW1
Answer: A
NEW QUESTION 72
Which parameter must a Citrix Architect configure to ensure that HDX Proxy Connection terminates upon AAA Session TimeOut?
- A. ICA session timeout in VPN parameters
- B. ICA session timeout in Citrix ADC Gateway Session Profile.
- C. Connection timeout(mins) in Citrix ADC gateway Session Profile.
- D. Connection timeout(mins) in VPN Parameters
Answer: B
NEW QUESTION 73
Which step does a Citrix Architect need to ensure during the Define phase when following the Citrix Methodology?
- A. The redundancy deployment decision was made.
- B. The project manager agrees with road map timelines.
- C. Testing steps were integrated.
- D. A phased roll out was completed.
- E. Existing networking infrastructure is ready.
Answer: B
NEW QUESTION 74
Which two settings must a Citrix Architect enable to deploy a shared VLAN on Citrix ADC VPX instance on an ESX platform? (Choose two.)
- A. VLAN tagging on the VLAN
- B. Promiscuous mode for shared VLANs
- C. VLAN sharing on the VLAN
- D. Port based VLAN tagging must be enabled
Answer: B,C
NEW QUESTION 75
Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version
12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall. The Cisco ASA Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.
The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer's security team:
The NetScaler MPX device:
* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.
* needs to protect backend servers from overloading.
* needs to queue all the incoming requests on the virtual server level instead of the service level.
* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and phishing proxies.
* should provide flexibility to enforce the decided level of security check inspections for the requests originating from a specific geolocation database.
* should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote ("); backslash (\); and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.
Which security feature should the architect configure to meet these requirements?
- A. Global Server Load balancing with Dynamic RTT
- B. Geolocation-based blocking using Application Firewall
- C. geolocation-based blocking using Responder policies
- D. Global Server Load Balancing with DNS views
Answer: A
NEW QUESTION 76
Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway, Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to NMAS 12.0.53.13 nc build.
The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.
The following requirements were discussed during the implementation:
* All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration
* All traffic should be secured and any traffic coming into HTTP should be redirected to HTTPS.
* Single Sign-on should be created for Microsoft Outlook web access (OWA).
* NetScaler should recognize Uniform Resource Identifier (URl) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.
* Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.
* The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL Which monitor will meet these requirements?
- A. add lb monitor mon_rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM ENABLED
- B. add lb monitor mon_rpc HTTP-ECV -send "GET/rpc/healthcheck.htm" recv 200 -LRTM DISABLED
-secure YES - C. add lb monitor mon_rpc HTTP -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED
-secure YES - D. add lb monitor mon_rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED
Answer: B
NEW QUESTION 77
Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The NetScaler devices are set up to handle NetScaler Gateway, Load Balancing, Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with NMAS version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair of NetScaler MPX 7500 devices with version
12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.
The following are the requirements that were discussed during the project initiation call:
* NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
* Configuration on the new MPX devices should be identical to MPX 11500 devices.
* Configuration changes after the deployment and initial setup should be optimized using NMAS.
* NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.
* As per the requirement from the Workspacelab team, NMAS should be store the audited data for only
15 days.
Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?
- A. Under Configuration jobs; Configuration Audit and Advice should be used prior to deployment.
- B. Under Configuration Management; Configuration Audit and Advice should be used prior to deployment.
- C. Under Stylebooks; Public and composite stylebook templates should be utilized prior to deployment.
- D. Under Stylebooks; Inbuilt and composite stylebook templates should be utilized prior to deployment.
Answer: B
NEW QUESTION 78
A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a NetScaler_________deployed_________. (Choose the correct option to complete sentence.)
- A. SDX; with less than 6 partitions and dedicated management interface
- B. CPX; as a stand alone device
- C. MPX; as part of the cluster but Cluster IP is NOT configured
- D. SDX; with no partitions as a stand alone device
- E. CPX; as part of a high availability pair
Answer: A
NEW QUESTION 79
Which two parameters must a Citrix Architect specify in the configuration job to replicate a specific configuration snippet from one Crtnx ADC instance to multiple instances? (Choose two.)
- A. Source Instance
- B. Saved Configuration
- C. Running Configuration
- D. Configuration Source
- E. Target Instance
Answer: C,D
NEW QUESTION 80
......
Verified 1Y0-440 dumps Q&As - Pass Guarantee Exam Dumps Test Engine: https://www.itexamreview.com/1Y0-440-exam-dumps.html
1Y0-440 Dumps for Pass Guaranteed - Pass 1Y0-440 Exam: https://drive.google.com/open?id=1475Nmwc9iH2g3XcU2Od8SJScyKGHElsD
