100% Free EMC DECA-PowerEdge DEA-41T1 Dumps PDF Demo Cert Guide Cover
PDF Exam Material 2021 Realistic DEA-41T1 Dumps Questions
There are no prior requirements for those aiming to take the course but one needs to be keen to capture the specific objectives emphasized in the outline. These are as follows:
- Core concepts about RAID.
- Application of the concept around performance monitoring for hardware and virtualization.
- Application of the best modalities involved during server security in addition to backup.
- Server security as well as site security and their importance.
- The basics concerning networking and its relationship with the server.
- Server roles as well as services.
- Differing server types.
The first step in this Dell DEA-41T1 exam training is to know some fundamental features of servers. Therefore, the candidates will go through the topics such as introduction, server storage, RAID concepts, system setup, and server OS. Next to explore is server networking, where the discussion will be built around Ethernet, internet protocol, and network services. The field of server applications is another vital one to cover when studying. The specific areas strengthen one’s knowledge of server applications, explain how to configure server roles, what is performance monitoring for hardware, as well as virtualization. After that, students consider server maintenance, which looks at seven major areas. Under it, learners will explore server maintenance, server components, server management, and power distribution. Other topics covered are environment as well as maintenance, troubleshooting server hardware, and managing change in addition to configuration. To finalize is the realm about server security. It includes an introduction, site security, and backup.
NEW QUESTION 31
What is the purpose of the DNS role?
- A. Distribute and update dynamic IP address
- B. Send out email from server to a client
- C. Transfer computer files between a client and a server
- D. Translate domain manes into IP address
Answer: A
NEW QUESTION 32
What is a benefit of SAS technology?
- A. Has two drives per cable connector
- B. Used for storage back-plane or HDD carrier applications
- C. Easy to manage cable and cable length
- D. Has no moving parts available
Answer: B
Explanation:
Explanation/Reference: http://www.mouser.com/ds/2/18/FCI_bwb_sas-941993.pdf
NEW QUESTION 33
A system administrator is unable to install Hyper-V on a Microsoft Windows Server 2016. What is a possible reason for this issue?
- A. Virtualization feature turned on in BIOS
- B. System is equipped with a 64-bit processor
- C. Standard license in installed
- D. System has 2 GB memory
Answer: A
NEW QUESTION 34
What is the Dell EMC iSM?
- A. Systems management console that simplifies monitoring of multiple Dell EMC servers
- B. Program that is installed and provides one-to-one systems management functionality
- C. Agent that expands iDRAC management functionality into the host operating system
- D. Out-of-band management platform on Dell EMC servers
Answer: C
Explanation:
Explanation
Explanation/Reference: https://www.dell.com/support/article/pk/en/pkbsd1/sln310557/dell-emc-idrac-service-module?
lang=en
NEW QUESTION 35
What is s backup process?
- A. Copying files to a secondary site for preservation in case of equipment failure of other catastrophe.
- B. Moving data that is no longer activity used to a separate storage device , for long-term retention.
- C. Using server technologies to transmit data from one computer node to another
- D. Capturing historical records used for further reference and is not actively used by the server.
Answer: D
NEW QUESTION 36
Based on the exhibit,
Grid Redundant mode is selected on a Dell EMC PowerEdge server and the Hot spare feature is disabled. How is the power output distributed in a dual-power supply configuration?
- A. Equally across both power supplies
- B. Majority of the output is always provided by power supply 1
- C. Power supply 2 only provides output power supply 1 reaches maximum capacity
- D. Only one supply waver provides power
Answer: C
NEW QUESTION 37
What is the object of server configuration management in an environment?
- A. Maximum performance perwatt at all utilization levels and workload types while performance requirements.
- B. Reduce cost servers regardless of workload types, or performance requirements.
- C. Minimize cost of server and to extend the lifetime of servers being used
- D. Maximize server performance, regardless of workload, utilization or performance requirements
Answer: A
NEW QUESTION 38
A server room has two power grids, A and
B. PSU1 on each server is on grid A, and PSU2 is on grid B. Grid B has significantly lower load compared to grid A.
What is the most likely cause of the unbalanced power load?
- A. PSU1 is a higher wattage power supply than PSU2
- B. UPS and PDU are not installed to balance the load
- C. Hot spare feature is enabled in power supply configuration
- D. PSU1 is always the primary power supply
Answer: D
NEW QUESTION 39
What process divides the data into blocks across multiple disk drives?
- A. Mirroring
- B. Parity
- C. Striping
- D. Redundancy
Answer: C
Explanation:
Explanation/Reference: https://searchstorage.techtarget.com/definition/RAID-0-disk-striping
NEW QUESTION 40
What is the correct sequence of message exchanges between a DHCP server and Client for a connection request?
Answer:
Explanation:
Explanation
DHCPDISCOVER -> DHCPOFFER -> DHCPREQUEST -> DHCPACK
NEW QUESTION 41
An administrator wishes to create a complex RAID set for a high-performance database, where the value of the data far exceeds the cost of the drives.
Which complex RAID level should be used?
- A. RAID 1
- B. RAID 50
- C. RAID 60
- D. RAID 10
Answer: D
NEW QUESTION 42
What is the maximum bootable storage capacity supported by BIOS mode?
- A. 512 GB
- B. 2 TB
- C. 4 TB
- D. 1 TB
Answer: B
NEW QUESTION 43
Refer to the exhibit.
What is this system referred to?
- A. HVAC
- B. CRAH
- C. HAC
- D. FANS
Answer: A
NEW QUESTION 44
Which RAID level has the lowest overhead of all RAID types?
- A. RAID 1
- B. RAID 0
- C. RAID 6
- D. RAID 5
Answer: B
NEW QUESTION 45
Whatis a consideration for a hardware administrator who is physically is physically installing multiple servers into a rack?
- A. Ensure that the server can connect to Windows updates
- B. Observe load requirements specified in document for the switch
- C. Avoid unevenly loading the rack and creating a hazard
- D. Ensure that the associated UPS can also power the top-ofrack switch
Answer: D
NEW QUESTION 46
A system administrator needs to install an operating system (OS) on a server that is in BIOS mode. What is the correct sequence of steps to set the server into BIOS mode?
Answer:
Explanation:
NEW QUESTION 47
Which solution is recommended for installing a hypervisor in a Dell EMC PowerEdge rack server or in a hyper-converged infrastructure (HCL) host?
- A. NVDIMM
- B. FC HBA
- C. CPU
- D. BOSS
Answer: D
NEW QUESTION 48
......
Updated EMC DEA-41T1 Dumps – PDF & Online Engine: https://www.itexamreview.com/DEA-41T1-exam-dumps.html
DEA-41T1.pdf - Questions Answers PDF Sample Questions Reliable: https://drive.google.com/open?id=1tt80J5SMTDp9kFp3IRn8a-Bs9DGf5fxr
