[Jan-2026] Free FCP_FWF_AD-7.4 Exam Questions FCP_FWF_AD-7.4 Actual Free Exam Questions
Verified FCP_FWF_AD-7.4 dumps and 169 unique questions
Fortinet FCP_FWF_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 88
When configuring bridge mode on FortiAP devices, which options should be considered?
(Select all that apply)
Response:
- A. Disabling SSID broadcast
- B. Setting up VLANs for traffic segmentation
- C. Enabling load balancing
- D. Configuring traffic flow between wired and wireless networks
Answer: B,D
NEW QUESTION # 89
For wireless networks configuration, which tools can be used?
Response:
- A. FortiGate integrated wireless controller
- B. FortiPlanner
- C. FortiPresence
- D. FortiAP Cloud
Answer: A,D
NEW QUESTION # 90
Refer to the exhibit.
An administrator authorizes two FortiAP devices connected to this wireless controller However, one FortiAP is not able to broadcast the SSIDs. What must the administrator do to fix the issue?
- A. Assign the FAP231F FortiAP profile to the problematic FortiAP device
- B. Enable the radios on the FAP23JF FortiAP profile.
- C. Replace the FortiAP device model to match the other device
- D. Disable the override setting on the FortiAP that is preventing it from broadcasting SSIDs
Answer: B
NEW QUESTION # 91
Which command is used to enable WIDS profiles on a FortiGate device?
Response:
- A. config wireless-controller wids
- B. config firewall wids
- C. config wifi wids
- D. config wlan wids-profile
Answer: A
NEW QUESTION # 92
For protecting against wireless network intrusions, you would configure:
Response:
- A. DHCP options.
- B. Wi-Fi signal boosters.
- C. Bandwidth management profiles.
- D. WIDS profiles.
Answer: D
NEW QUESTION # 93
Which option is used to configure connection rules between the wireless and wired network on a FortiAP device?
Response:
- A. VLAN configurations
- B. Advanced bridge mode options
- C. FortiAP load balancing
- D. FortiGate guest management
Answer: B
NEW QUESTION # 94
WIDS profiles are primarily used for:
Response:
- A. Assigning IP addresses to wireless clients.
- B. Enhancing Wi-Fi signal strength.
- C. Wireless Intrusion Detection System configurations.
- D. Deploying firmware updates to APs.
Answer: C
NEW QUESTION # 95
What might cause wireless performance issues?
Response:
- A. Incorrectly set clock on the wireless controller
- B. Interference from other electronic devices
- C. AP located too close to client devices
- D. A mismatch in wired network settings
Answer: B
NEW QUESTION # 96
What is the purpose of configuring WPA3 encryption on a wireless network?
Response:
- A. To enable load balancing for wireless clients
- B. To provide strong security for wireless communications
- C. To manage guest accounts on the network
- D. To improve wireless signal strength
Answer: B
NEW QUESTION # 97
What type of server roles does the FortiPresence VM require to operate on-premises?
(Choose two.)
Response:
- A. Authentication server
- B. Infrastructure server
- C. Terminal server
- D. Application server
Answer: B,D
NEW QUESTION # 98
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct?
(Choose two.)
Response:
- A. DARRP measurements can be scheduled to occur at specific times.
- B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- C. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- D. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
Answer: A,B
NEW QUESTION # 99
Advanced bridge mode options on FortiAP devices allow for direct communication between wireless and wired networks.
Response:
- A. False
- B. True
Answer: B
NEW QUESTION # 100
Which two roles does FortiPresence analytics assist in generating presence reports?
(Choose two.)
Response:
- A. Comparing current data with historical records
- B. Reporting potential threats by guests on site
- C. Gathering details about on site visitors
- D. Predicting the number of guest users visiting on-site
Answer: A,C
NEW QUESTION # 101
How can poor roaming capabilities between APs affect wireless clients in an office environment?
Response:
- A. Frequent disconnections
- B. Increased throughput
- C. Improved connection stability
- D. Enhanced wireless signal strength
Answer: A
NEW QUESTION # 102
What insights can packet captures provide?
Response:
- A. RF interference levels
- B. Possible issues in the handshake process
- C. The type of encryption being
- D. The quality of the connection between client and AP
Answer: B,C,D
NEW QUESTION # 103
Which features can be utilized for improved client distribution and efficient bandwidth usage?
Response:
- A. FortiGate guest management
- B. Advanced bridge mode options
- C. FortiAP load balancing
- D. VLAN load-balancing
Answer: C,D
NEW QUESTION # 104
Refer to the exhibit.
The wireless client connects to the wireless network on WLAN_NET tunnel mode interface The exhibit stows the client exchange communication with the wireless controller and the RADIUS server Which two issues can you observe in the wireless station debug outputs (Choose two.)
- A. The wireless client has denied the connection after many failed trials
- B. The wireless client has failed to complete the four-way handshake process.
- C. The wireless client has an unsuccessful association with the wireless controller
- D. The wireless client has incorrect credentials to authenticate with the authentication server
Answer: A,B
NEW QUESTION # 105
Which configurations should be applied to enhance wireless security on FortiGate?
(Select all that apply)
Response:
- A. Implement VLAN load-balancing
- B. Enable WIDS profiles for rogue AP detection
- C. Hide SSIDs to reduce visibility
- D. Configure WPA3 encryption for SSIDs
Answer: B,C,D
NEW QUESTION # 106
Two APs are located in a shop that is required to support forty 2.4 GHz point-of-sale wireless devices. The APs are managed by a centrally hosted FortiGate. A previous wireless network administrator has enabled client load balancing between APs.
However, the clients are not balancing well between the APs, causing overloading on one of the AP radios. Refer to the exhibit, which is part of the configuration of the AP profile that is used for the APs.
The first AP has 35 clients associated with it, the second has five clients associated with it. The detected noise floor of the network is -91dBm. The channel utilization for both 2.4 GHZ interfaces is less than 40%. The clients have a detected signal strength of between -53 and -71 dBm. Which configuration change would improve the distribution of wireless clients between the APs? Response:
- A. Decrease the handoff-rssi option to 20.
- B. Manually configure 2.4GHz interfaces of both APs to separate channels.
- C. Set the max-clients option to 20.
- D. Increase the handoff-sta-thresh option to 20.
Answer: A
NEW QUESTION # 107
Which command is used to capture and analyze wireless client traffic on a FortiGate device?
Response:
- A. get system wireless capture
- B. diagnose wireless-controller wlac -c Sta
- C. execute wireless-controller packet-capture
- D. config wireless-controller diag-capture
Answer: B
NEW QUESTION # 108
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices. Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs. To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance? Response:
- A. Increase the transmission power of the AP radios
- B. Enable frequency handoff on the AP to band steer clients
- C. Reduce the number of wireless networks being broadcast by the AP
- D. Install another AP in the reception area to improve available bandwidth
Answer: B
NEW QUESTION # 109
When securing a wireless environment, which measures can help prevent unauthorized access?
Response:
- A. Regularly changing the network name (SSID)
- B. MAC address filtering
- C. Using strong encryption like WPA3
- D. Enabling a guest network
Answer: B,C
NEW QUESTION # 110
......
Latest 100% Passing Guarantee - Brilliant FCP_FWF_AD-7.4 Exam Questions PDF: https://www.itexamreview.com/FCP_FWF_AD-7.4-exam-dumps.html
FCP_FWF_AD-7.4 Dumps for Pass Guaranteed - Pass FCP_FWF_AD-7.4 Exam: https://drive.google.com/open?id=10LLA31TdErbimAXys8nQCJqbB_Kj1uUA
