E-S4HCON2023 Training & Certification Get Latest SAP Certified Technology Specialist Updated on Sep 05, 2025
Certification Training for E-S4HCON2023 Exam Dumps Test Engine
NEW QUESTION # 41
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:
- A. These are 40 pairs of R3load processes, so there are 80 R3load processes running.
- B. SUM is still running in uptime; the number of 40 defined R31oad processes is considered.
- C. The number of CPU cores does not allow more than 40 R31oad processes to be run in parallel.
- D. There is a maximum of 40 parallel R31oad processes within this specific downtime phase.
Answer: A
NEW QUESTION # 42
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step "Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:
- A. The SAP Support Packages that will be bound to the upgrade
- B. The SAP Support Packages contained in the upgrade media
- C. The SAP Support Packages found in the download directory
- D. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
Answer: C
NEW QUESTION # 43
Unicode migration ECC on MaxDB to HANA in scale out what should we consider.
- A. Target DB size will increase temporarily
- B. A
- C. DMO can only be run with systems NW740 or NW731
Answer: A,C
NEW QUESTION # 44
You are running an SAP ECC system.
For which of the following activities does SUM allow you to use the near-Zero Downtime Maintenance (nZDM) capabilities?
Note There are 3 correct answers to this question
- A. Upgrade the SAP system
- B. Use DMO for SUM
- C. Apply SAP support packages
- D. Perform an SAP S/4 HANA conversion including DMO
- E. Perform an SAP S/4 HANA conversion without DMO
Answer: A,B,C
NEW QUESTION # 45
What is the minimum SAP_BASIS release of an SAP ECC system that can be converted to an SAP S/4HANA Server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 46
What is the main purpose of performing benchmark runs for an SAP S/4HANA conversion?
- A. To optimize the conversion
- B. To optimize the activation
- C. To optimize the main import
- D. To optimize the migration
Answer: D
NEW QUESTION # 47
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:
- A. Check the system log (transaction SM21) of the SAP system
- B. Check the messages shown by the SUM UI
- C. Check the most recent entries shown in file sapevt.trc
- D. Check the most recent entries in SAPup.log
Answer: B,D
NEW QUESTION # 48
What do you do to prepare the database migration option of a SUM procedure?
There are 3 correct answers
Response:
- A. Move the R3trans update archive into the download folder
- B. Move the stack.xml update file into the download folder
- C. Extract the SAP HANA client installation archive
- D. Extract the SAP HANA database installation archive
- E. Move the SAPM update archive into the download folder
Answer: B,C,E
NEW QUESTION # 49
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the main configuration option "Single System" when installing an Add-On
- B. Using the database migration option (DMO) for SUM
- C. Using the main configuration option "Single System" in case of an upgrade.
- D. Using the main configuration option "Standard" when applying SAP Support Packages
Answer: A
NEW QUESTION # 50
You are performing an SAP S/4HANA conversion with DMO. You are using the downtime-optimized data conversion (DoC). Which steps can partially be moved to uptime processing? Note: There are 2 correct answers to this question.
- A. Migration
- B. Software update
- C. Conversion
- D. Main import
Answer: A,C
NEW QUESTION # 51
You want to perform an SAP S/4HANA conversion using SUM with DMO. Which steps run before the beginning of the technical downtime, independent of your SUM configuration?
There are 3 correct answers to this question.
Response:
- A. Import of upgrade and language data from the download directory in phase TABIM UPG
- B. Generation of the new ABAP loads in phase RUN_SGEN_GENER8
- C. Import of dictionary objects from the download directory in phase DDIC_UPG
- D. Activation of dictionary objects in phase ACT_UPG
- E. Creation of application tables in the SAP HANA database in phase EU_CLONE_MIG_DT_CREATE
Answer: A,C,D
NEW QUESTION # 52
You want to perform custom code check via ABAP test cockpit in preparation of your SAP S/4HANA conversion? What kind of SAP System can you use to generate the custom code migration worklist?
- A. A Standalone SAP system with ABAP 7.51 or above
- B. An SAP S4HANA 1709 sandbox system
- C. AA
Answer: A,B
NEW QUESTION # 53
During a SUM run you want to check if the phase SHADOW_IMPORT_INC is still running properly. Where can you find information about this?
There are 2 correct answers to this question.
Response:
- A. Check for the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- B. Check for running R3trans processes on the host of the primary application server
- C. Check for running batch jobs in the shadow system via Job Overview (SM37)
- D. Check for running R31oad processes on the host of the primary application server
Answer: A,B
NEW QUESTION # 54
ICNV initialization does 3
- A. Creation of flag
- B. Build index on flag column
- C. Creation of views
- D. AA
Answer: A,B,C
NEW QUESTION # 55
You are performing an SAP S/4HANA conversion. Which phases are executed during SUM technical downtime? Note: There are 2 correct answers to this question
- A. TABIM_SHADOW_*
- B. PARMVNT_UPG
- C. TABIMJJPG
- D. PARDIST_SHD
Answer: C
NEW QUESTION # 56
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:
- A. Downtime migration (EU_CLONE_MIG_DT_RUN)
- B. Shadow repository creation (EU_IMPORT*)
- C. ParaUel distribution (PARDIST_SHD)
- D. Uptime migration (EU_CLONE_MIG_UT_RUN)
Answer: D
NEW QUESTION # 57
What do you need to know about the SAP S/4HANA Conversion Guide? Note: There are 2 correct answers to this question.
- A. It explains the database migration option (DMO) of SUM.
- B. It explains where to find information about the custom code analysis.
- C. It is a database-specific document.
- D. It contains a section about the simplification item (SI) checks.
Answer: B,D
NEW QUESTION # 58
You downloaded content from the SAP note 1000009 ("ASU Toolbox 2008"). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:
- A. /ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)
- B. /ASU/SHOW_NOTE (Show SAP Note via Web-Browser)
- C. /ASU/SSM (ASU Simple Schedule Manager)
- D. /ASU/START (Start ASU Toolbox)
Answer: D
NEW QUESTION # 59
Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?
- A. Shadow on target creation
- B. Downtime conversion
- C. Silent data migration (SDM)
- D. Downtime migration
Answer: D
NEW QUESTION # 60
You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step "Extraction".
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:
- A. In DMO Migration Preparation
- B. In Process Control Center
- C. In SUM Parameters
- D. In SUM Phaselist
Answer: B,C
NEW QUESTION # 61
What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:
- A. To skip selected phases during the SUM run
- B. To make the progress information within SUM UI more accurate
- C. To repeat specific phases during the SUM run
- D. To auto-fill specific fields on selected screens on the SUM UI
Answer: B
NEW QUESTION # 62
During a SUM run, you want to check if the PARCONV_UPG phase is still running properly. Where can you find information about this? Note: There are 2 correct answers to this question.
- A. Check the running batch job via Job Overview (SM37).
- B. Check for running R3load processes on the host where SUM is running.
- C. Check for running R3trans processes on the host where SUM is running.
- D. Check the latest log files in the SUM directory, subdirectory abap, subdirectory tmp.
Answer: A,D
NEW QUESTION # 63
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of a named user in the development client of the development system
- B. Credentials of user DDIC in the development client of the development system
- C. Credentials of user DDIC in client 000 of the shadow system
- D. Credentials of a named user in client 000 of the shadow system
Answer: D
NEW QUESTION # 64
You are upgrading a three-system landscape DEV - QAS - PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system. What do you need to consider? Please choose the correct answer.
- A. The transport between Unicode and non-Unicode systems is forbidden.
- B. The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.
- C. The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.
- D. The upgrade of the PRD must be finished before you start new development in the DEV.
Answer: B
NEW QUESTION # 65
......
Step by Step Guide to Prepare for E-S4HCON2023 Exam: https://www.itexamreview.com/E-S4HCON2023-exam-dumps.html
SAP Certified Technology Specialist E-S4HCON2023 Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=1beLnZxo0B5rJhObiJghtQwxDwrNBw-tk
